INSTALLATION OF STEERING SHAFT
Install the steering shaft with the bushing.
Apply grease to the bushing.
Install the bushing holder and tighten
the nuts.
Torque: 24-30 N.m
Install the steering shaft nut and tighten it.
This nut is under this steering shaft.
Torque: 50-60 N.m
INSTALLATION OF TIE-ROD
Install the ball joint with " L" mark on the
steering shaft side.
Install the tie-rod with the mark on the wheel side.
Let the distance between the ball joints be 164 mm
for RXL 50/70/90 and RXL90R and RXL50M.
This is temporary setting.
36