Exhaust Pipe Drawing - Eton ATV RXL 50 Service Manual

Before remove the front body cover
you should remove the handle bar cover firstly.
Secondly, you should disassembly the front and
rear brake cable and throttle cable, then
disassembly the handle bar.
As picture 7 unscrew the bolt then you can remove
the front body fender.
As picture 8 & 9 unscrew these three bolts then
you can remove the front R/L fender.

11.3 EXHAUST PIPE DRAWING

This pipe is for ATV RXL 50/70/90 and RXL 90R and RXL 50M serial
53
Picture 7
Picture 8
Picture 9