HYOSUNG TE 100 Manual page 47

REPLACEMENT OF THE LAMP
(FOR TE100
Requirement electric power of the lamp
shown in the following chart.
When replace the damaged lamp, always
use the equal capacity.
The use of a lamp other than rules may
cause to excesive at the electric system or
damage the lamp.
NAME
Head lamp
Tail lamp
CAUTION
The use of a lamp other than rules may
cause to occur the vehicle fire and to
damage electric parts.
Surely use only the lamp of proper
capacity.
◉ ◉ HEAD LAMP
1. Remove the two screw
2. After removing the bulb at the socket,
replace the new bulb.
3. To install the head lamp, reverse the
above sequence.
CAPACITY
12V 35W
12V 5W
(right, left).
◉ ◉ TAIL LAMP
1. Remove the lens at the tail lamp rubber
housing.
2. After removing the bulb at the socket,
replace the new bulb.
3. To install the tail lamp, reverse the above
sequence.
47