Controls; Ignition Switch; Left Handlebar - HYOSUNG TE 100 Manual

C O N T RO L S

IGNITION SWITCH

The ignition switch has two position :
◉ ◉
(ON) POSITION
The ignition circuit is completed and the
engine can now be started. The key cannot
be removed from the ignition switch in this
position.
◉ ◉ "OFF" POSITION
All electrical circuits are cut off.
The engine will not start. The key can be
removed.
IGNITION KEY
『 『 TE100 / 90』 』 comes equipped with a pair
of identical ignition key.
Keep the spare key in a safe place.
ON
KEY

LEFT HANDLEBAR

① ① Rear Brake Lever
Apply the rear brake by squeezing the rear
brake lever towards the grip.
② ② Parking Brake Knob
This knob is used to set the parking brake,
which is used to prevent the 『A T V』from
moving when it is parked, being started, or
at idle. Set the parking brake by squeezing
the rear brake lever and pushing this knob
to lock the lever in the squeezed position.
③ ③
Starter Switch
Push in the electric starter switch to rotate
the starting motor.
T E 1 0 0 always come on the head
lamp and tail lamp when starting engine.
N O T E
If the front or rear brake lever is not
squeezed, the starter motor will not
rotate.
17
CAUTION