HYOSUNG TE 100 Manual page 37

4. Reinstall the cleaned element in reverse
order of removal. Be sure that the
element is securely in position and is
sealing properly.
WARNING
Keep cleaning solvent and oil away from
children and pets. Dispose of used
solvent and oil properly.
CAUTION
Be sure to position the air cleaner
element correctly. Make sure it fits
properly so that no incoming air will
bypass it. Remember, rapid wear of
piston rings and cylinder walls is often
caused by an improperly positioned air
cleaner element.
SPARK PLUG
Your 『TE100 / 90』comes equipped with
an BPR7HS spark plug. You can deter-
mine if the standard spark plug is suitable
for your type of vehicle usage by observing
the color of the plug' s porcelain center
electrode insulator after vehicle operation. If
the plug has the correct heat range, it
should be very light brown in color. If the
plug tends to run cold, (usually evidenced
by blackening of the insulator or a wet
electrode) replace it with an alternate plug
according to the following chart.
An improper spark plug may have an
incorrect fit or heat range for your
engine. This may cause severe engine
damage which may not be covered
under warranty. Use one of the spark
plugs listed below or equivalents.
Consult your HYOSUNG dealer if you
are not sure which spark plug is correct
for your type of vehicle usage.
PLUG REPLACEMENT GUIDE
Hotter type
Standard type
Colder type
If the above-named plugs are not available,
consult your HYOSUNG dealer.
37
CAUTION
BPR6HS
BPR7HS
BPR8HS