HYOSUNG TE 100 Manual page 36

◉ ◉ Removing The Element
1. Remove the four bolts ①.
2. Remove the clamp screw ②.
3. Take out the air cleaner cap ③ and air
cleaner element ④.
◉ ◉ Washing the Element
Wash the element as follows :
1. Fill a washing pan large enough to hold
the element with a non-flammable
cleaning solvent � . Immerse the
element in the solvent and wash it.
2. Squeeze the element by pressing it
between the palms of both hands to
remove excess solvent. Do not twist or
wring the element or it will develop
cracks.
3. Immerse the element in a separate pan
filled with 2-stroke engine oil � .
Squeeze the element to remove excess
oil. Make sure that the element remains
damp with oil (but not soaked).
Before, during, and after the cleaning
operation, carefully examine the element
for any tears in the material. A torn
element could permit dirt and dust to
pass into the engine. If the air cleaner
element is torn, it must be replaced with
a new one.
36
WARNING