Break-In (Running-In) - HYOSUNG TE 100 Manual

BREAK-IN (RUNNING-IN)

The first month is the most important in the
life of your vehicle. Proper operation during
this break-in period will help ensure
maximum life and performance from your
new vehicle.
The following guidelines explain proper
break-in procedures.
★ ★ MAXIMUM THROTTLE OPEN-
ING RECOMMENDATION
During the first 10 hours of vehicle
operation, the maximum thottle opening
you should use is 1/2 throttle.
★ ★ VARY THE ENGINE SPEED
The engine speed should be varied during
the break-in period. Although it is essential
that some stress be placed on the engine
components during break-in, you must be
careful not to excessively load the engine.
★ ★ AVOID CONSTANT LOW
SPEED
Operating the engine at constant low speed
(light load) can cause parts to glaze and not
seat properly. Allow the engine to
accelerate freely through the gears, without
exceeding the maximum recommnded
throttle opening.
★ ★ OBSERVE YOUR INITIAL
AND MOST CRITICAL
SERVICE
The initial service (break-in maintenance) is
the most important service your vehicle will
receive. During break-in operation, all of the
engine components will have mated
together and seated. Maintenance required
as part of the initial servie includes
correction of all adjustments, tightening of
all fasteners and replacement of dirty oil.
Timely performance of this service will
ensure optimum service life and perfor-
mance from the engine.
WARNING
The initial service (after 1 month of
vehicle operation) should be performed
as outlined in the INSPECTION AND
MAINTENANCE section of this Owner
Manual. Pay particular attention to the
information contained in the CAUTION
and WARNING section when perform-
ing this maintenance.
23
'
s