Break-In; Maximum Throttle Opening Recommendation; Vary The Engine Speed - HYOSUNG TE 50 B Owner's Manual

1. Place the lanyard in the vinyl bag provided
with the vehicle, with the rubber cap visible
at the bag opening.
2. Hook the bag on the frame as shown and fit
the rubber cap snugly over the remote
engine stop switch body.
『 『 』 』
The first month is the most important in the life
of your vehicle. Proper operation during this
break-in period will help ensure maximum life
and performance from your new vehicle.
The following guidelines explain proper break-in
procedures.
★
During the first 10 hours of vehicle operation,
the maximum thottle opening you should use is
1/2 throtttle.
★
The engine speed should be varied during the
break-in period. Although it is essential that
some stress be placed on the engine compo-
nents during break-in, you must be careful not to
excessively load the engine.
★
Operating the engine at constant low speed
(light load) can cause parts to glaze and not
seat properly. Allow the engine to accelerate
freely through the gears, without exceeding the
maximum recommnded throttle opening.
★
The initial service (break-in maintenance) is the
most important service your vehicle will receive.
During break-in operation, all of the engine com-
ponents will have mated together and seated.
Maintenance required as part of the initial servie
includes correction of all adjustments, tightening
of all fasteners and replacement of dirty oil.
Timely performance of this service will ensure
optimum service life and performance from the
engine.
14