CONTROLS
IGNITION SWITCH
The ignition switch has two position :
(ON) POSITION
The ignition circuit is completed and the
engine can now be started. The key cannot
be removed from the ignition switch in this
position.
OFF POSITION
All electrical circuits are cut off.
The engine will not start. The key can be
removed.
IGNITION KEY
TE100R comes equipped with a pair of
identical ignition key.
Keep the spare key in a safe place.
ON
KEY
INDICATOR LAMP
OIL INDICATOR LAMP
when the engine oil level in the tank
becomes too low requiring HYPOL OIL
refilling, the indicator will light.
When the oil indicator lamp turns on, the
remaining amount of oil has become
approximately 0.2
The engine oil tank capacity is 0.6
When the oil indicator lamp comes
on, you should add engine oil to the
engine oil tank at the first opportunity
to avoid running out of engine oil.
The lack of engine oil will damage
engine severely.
For checking the oil indicator lamp,
the ignition switch
12
CAUTION
CAUTION
(ON).