Initial Settings; Adjusting Initial Settings; Setting The Rear Output And Subwoofer Controller; Editing The Pin Code - Pioneer Super Tuner IIID AVIC-N5 Operation Manual

Customizing the AV Source Setting
p The DivX subtitles will be displayed even
when the subtitle file setting is on if no cor-
responding subtitle files exist.
p Up to three lines can be displayed at
once.

Initial Settings

Adjusting initial settings

1
Initial settings lets you perform initial set up of
different settings for navigation system.
1 Function display
1 Touch [Off] in AV Source screen to turn
source off.
= For details, refer to Selecting an AV source
on page 39.
2 Press MENU button to change to AV
MENU.
3 Touch [Initial].
Setting the rear output and
subwoofer controller
This navigation system's rear output (rear
speaker leads output and RCA rear output)
can be used for full-range speaker
(Rear SP Full) or subwoofer (Rear SP Sub. W)
connection. If you switch the rear output set-
ting to Rear SP Sub. W, you can connect a
rear speaker lead directly to a subwoofer with-
out using an auxiliary amp. Initially, the navi-
gation system is set for rear full-range speaker
connection (Rear SP Full). When rear output is
connected to full-range speakers (when
Rear SP Full is selected), you can connect the
RCA subwoofer output to a subwoofer. In this
case, you can select whether to use the sub-
woofer controller's (low pass filter, phase)
built-in Preout Sub. W or the auxiliary
Preout Full.
p When 5.1CH setting is [On], the rear out-
put and subwoofer setting is not available.
1 Touch [Rear SP] in Initial menu.
2 Touch [Rear SP] to switch the rear out-
put setting.
When no subwoofer is connected to the rear
output, select Full.
When a subwoofer is connected to the rear
output, select Sub. W.
p When the rear output setting is Sub. W,
you cannot change the subwoofer control-
ler.
3 Touch [Preout] to switch the subwoofer
output or non fading output.
p Even if you change this setting, there is no
output unless you turn [Non Fading] or
[Sub Woofer] in Sound menu [On].
= For details, refer to Using non fading output
on page 133.
= For details, refer to Using subwoofer output
on page 133.
p If you change the subwoofer controller
(Rear SP), the subwoofer output
(Sub Woofer) and non fading output
(Non Fading) in Sound menu return to the
factory settings.
p Both rear speaker leads output and RCA
rear output are switched simultaneously in
this setting.

Editing the PIN code

You can edit the PIN code you like. Use this
function when you need to change the PIN
code from the default setting.
1 Touch [PIN Edit] in Initial menu.
Chapter
09
137
En