Table of Contents
Advertisement
Chapter 4
Using the Command-Line Interface for Quick Configuration
Step 7
The system redisplays the static routes.
Deleting a Static Route
Step 1
To delete a static route, at the prompt enter 2. The system asks you which route you want to delete.
Changing admin Password
You can change the password for the admin administrator user. For ease of use during startup, the default
admin password supplied with the VPN 3002 is also admin. Since the admin user has full access to all
management and administration functions on the device, we strongly recommend you change this
password to improve device security. You can further configure all administrators with the regular
Administration menus.
The system prompts you to change the admin password.
Step 1
OL-2854-01
Quick -> _
Static Routes
-------------
Destination
Mask
------------------------------------------------------------
0.0.0.0
0.0.0.0
192.44.55.6
255.0.0.0
1) Add Static Route
2) Delete Static Route
3) Back
4) Continue
> Delete Which Route (net address)
Quick -> 192.44.55.6
3) Back
4) Continue
Enter the IP address of the network address for the route you want to delete.
The menu displays again, with the route you deleted no longer present. To continue with quick
configuration, at the prompt enter 4.
-- : We strongly recommend that you change the password ...
> Reset Admin Password
Quick -> [ ***** ] _
Metric Destination
1 130.0.0.1
1 10.10.99.10
VPN 3002 Hardware Client Getting Started
Changing admin Password
4-17
Advertisement
Table of Contents
