Table of Contents
Advertisement
Configuring the Private Interface
Configuring the Private Interface
The VPN 3002 Configuration | Quick | Private Interface screen displays.
Figure 3-6
This screen lets you configure the VPN 3002 private interface, which is the interface to your private
network (internal LAN).
The screen displays the current configuration settings.
Note
For the VPN 3002 to operate in Network Extension mode, you must change the private interface IP
address from the default of 192.168.10.1.
Caution
If you modify any parameters of the interface that you are currently using to connect to the VPN
3002, you will break the connection, and you will have to restart the Manager and quick configuration
from the login screen.
Step 1
To reconfigure the IP address for the private interface, select Yes. The Manager displays the
Configuration | Quick | Private Interface | Address screen. See
section.
To use the VPN 3002 DHCP server to provide addresses for the local LAN, select one of the Yes options.
Step 2
If you select Yes, and configure the DHCP server parameters, the Manager displays the Configuration |
Quick | Private Interface | DHCP Server screen. See
When you have made your selections, click Continue to apply your changes and proceed. Click Back if
Step 3
you do not want to save your changes; you return to the Configuration | Quick | Private Interface screen.
VPN 3002 Hardware Client Getting Started
3-6
Chapter 3
Configuration | Quick | Private Interface Screen
Using the VPN 3002 Hardware Client Manager for Quick Configuration
Figure 3-7
Figure 3-8
and perform the steps in that section.
and perform the steps in that
OL-2854-01
Advertisement
Table of Contents
