Clearing Memory Data (Reinitialization) - Brother BAS-300G Instruction Manual

6-11. Clearing memory data (reinitialization)

If the sewing machine stops operating normally, the cause may be that an incorrect memory setting may have been made by
means of the memory switch, for instance. In such cases, normal operation may be restored if the memory data is
reinitialized.
Parameter No.
1
2
3
4
5
* Refer to the instruction manual for the programmer for details of expansion option output.
1
All indicators switch off
TEST indicator illuminates, MENU indicator switches off
2
Selecting individual sewing programs
3
4
End data initialization mode
TEST indicator switches off
[ SEW] Clearing all sewing programs
Clearing individual sewing programs
[−***]
[ MEM] Reinitializing memory switches
Clearing or reinitializing all memory data (sewing programs, memory switches,
[ ALL]
user programs, cycle programs and expansion option output data)
[ USE] Clearing user programs and cycle programs
[ EoP] Clearing expansion option output data
Press and hold the RESET key for 2 seconds or more.
• A long beep will sound and the data for the selected item will be reinitialized.
• The setting details for only the initialized item will change from flashing to
steadily illuminated.
Press the TEST key.
BAS-300G, BAS-311G, BAS-326G
6. USING THE OPERATION PANEL (ADVANCED OPERATIONS)
Setting items
While holding down the RESET key, turn on the power
switch.
* Keep pressing the RESET key until the model name is
displayed and the buzzer beeps once.
• The parameter number will appear in the PROGRAM
No. display, and the setting details for that parameter
will appear in the menu display.
or
Press the
that you would like to reinitialize.
For parameter No. 1, press the
display from " SEW" to "−***".(*** is the sewing program
number.)
Press the or
number that you would like to clear.
key to select the parameter number
key to change the
key to select the sewing program
4562Q 4421Q
4557Q
4563Q
46