Specifications - Brother BAS-300G Instruction Manual

2. SPECIFICATIONS

Sewing machine
Stitch formation
Max. sewing speed
Max. sewing area (XxY)
Feed mechanism
Stitch length
No. of stitches
Maximum no. of stitches
No. of sewing data items
that can be stored
Work clamp lift method
Work clamp height
2-step work clamp
Intermittent presser foot lift
amount
Intermittent stroke
Hook
Wiper device
Thread trimmer
Data storage method
User programs
Cycle programs
Motor
Weights
Power supply
Air pressure
(*1) The number of data items and stitches that can be stored will vary depending on the number of stitches in each
program.
(*2) Supply of parts relating to 3.5-inch floppy disks has already been discontinued. (However the mechanism will still
function.)
Lock stitch pattern tacking sewing machine (with large shuttle hook)
BAS-300G: 130 x 60 mm
Internal memory: 512 (*1), CF card: 900
Motor-driven work clamp specifications: Pulse motor drive method
Pneumatic work clamp specifications: Pneumatic method
Motor-driven work clamp specifications: Max. 25 mm
Pneumatic work clamp specifications: Max. 30 mm
Motor-driven work clamp specifications: Integrated-type work clamp
Pneumatic work clamp specifications: Separate-type work clamp
2 − 4.5 mm, 4.5 − 10 mm or 0 (Default setting 3 mm)
Double-capacity shuttle hook (standard shuttle hook sold separately)
Internal memory (Flash memory), CF card (32 MB − 2 GB)
3.5 floppy disk 2HD/1.44MB, 2DD (*2)
Machine head approx. 88 kg, operation panel approx. 0.6 kg
Control box 14.2 − 16.2 kg (Differs depending on destination)
Single-phase 110 V/120 V/220 V/240 V, Three-phase 220 V/400 V 400 VA
BAS-300G, BAS-311G, BAS-326G
Single needle lock stitch
2,700 sti/min
BAS-311G: 130 x 100 mm
Intermittent feed, pulse motor drive
0.05 − 12.7 mm
500,000-stitch internal memory (*1)
20,000 stitches (per program)
22 mm
Standard equipment
Standard equipment
50
9
550 W AC servo motor
0.5 MPa 1.8 l/min.
2. SPECIFICATIONS
2997B
BAS-326G: 220 x 100 mm
2