Installing The Eye Guard; Installing The Motor Cover - Brother BAS-300G Instruction Manual

3. INSTALLATION

3-14. Installing the eye guard

Attach all safety devices before using the sewing machine.
If the machine is used without these devices attached, injury may result.

3-15. Installing the motor cover

17
CAUTION
BAS-300G, BAS-311G, BAS-326G
(1) Screw (loosen)
(2) Eye guard (tilt forward)
(3) Eye guard assembly
(4) Plain washers [2 pcs.]
(5) Screws [2 pcs.]
After installing the eye guard assembly
(3), return the eye guard (2) to its original
angle, and then tighten the screw (1) to
secure it in place
2367B
(1) Motor cover R
2975B
(2) Screws [4 pcs.]
(3) Motor cover L
(4) Screws [4 pcs.]
(5) Motor cover
(6) Screws [4 pcs.]
NOTE:
Be careful not to clamp the cords when
installing the motor cover.
2976B