Tilting The Sewing Machine Head - Brother BAS-300G Instruction Manual

3. INSTALLATION
• Gently return the machine head to its original position.
• Loosen the screw (31). Move the machine head switch (32) to the position shown in the illustration, and then secure the machine
head switch (32) with the screw (31) and the accessory M3x16 screw (33).
• Check that the machine head switch (32) is turned on as shown in figure 1.
NOTE:
If the machine head switch is not turned on, errors "E050", "E051" and "E055" will be generated.

3-5. Tilting the sewing machine head

2970B
1. Move the work clamp arm (1) as far as it will go in the direction of the arrow in the illustration (to the right when looking from the
front of the sewing machine).
2. Stand at the left side of the table, and gently tilt the machine head towards you.
NOTE:
Always be sure to move the work clamp arm (1) all the way to the right before tilting back the machine head. If you try to tilt back
the machine head while the work clamp arm (1) is still on the left side, it may damage the outer cover L (2).
9
Figure 1
CAUTION
BAS-300G, BAS-311G, BAS-326G
Oil pan
2365B
4919Q