Brother BAS-300G Instruction Manual page 49

6
Next, set the work clamp height
(motor-driven work clamp specifications only).
7
Next, set the intermediate work clamp height
(when memory switch No. 003 is set to "2"
for motor-driven work clamp specifications).
8
Next, set the intermittent presser foot height.
9
TEST indicator illuminates, MENU indicator flashes
10
End user program recording mode.
TEST indicator switches off, MENU indicator illuminates
THREAD/CLAMP indicator flashes
THREAD/CLAMP indicator flashes
THREAD/CLAMP indicator flashes
BAS-300G, BAS-311G, BAS-326G
6. USING THE OPERATION PANEL (ADVANCED OPERATIONS)
Press the SELECT key.
Press the or
be recorded.
Press the SELECT key.
Press the or
clamp height to be recorded.
Press the SELECT key.
Press the or
height to be recorded.
Press the SELECT key.
• If setting further user programs, select the user
program number and then repeat steps 2 to 9.
Press the TEST key.
This completes the recording of a user program.
• The user program number will flash in the PROGRAM
No. display, and the sewing machine will switch to
home position detection standby.
key to set the work clamp height to
key to set the intermediate work
key to set the intermittent presser foot
4967Q
4968Q
4969Q
4970Q
4971Q
40