Setting Memory Switches - Brother BAS-300G Instruction Manual

6-2. Setting memory switches

1
All indicators switch off
2
If you would like to display only the numbers of
memory switches that have been changed from
default settings
3
Ending setting mode
•
If you would like to return the setting for a single memory switch to the default setting, press the
RESET key while the number for that memory switch is displayed.
•
To return the settings for all memory switches to the default settings, keep pressing the RESET key
for two or more seconds until the buzzer makes a long beep.
6. USING THE OPERATION PANEL (ADVANCED OPERATIONS)
Menu indicator switches off
TEST indicator illuminates
TEST indicator switches off
BAS-300G, BAS-311G, BAS-326G
While pressing the SELECT key, turn on the power
switch.
* Keep pressing the SELECT key until the model name
is displayed and the buzzer beeps once.
or
With the power turned on, press the TEST key and the
TENSION/WIND key simultaneously.
• The memory switch number will appear in the
PROGRAM No. display, and its setting value will
appear in the menu display.
or
Press the key to select the memory switch
number.
or
Press the key to change the setting.
While pressing the SELECT key, press the
• The numbers of memory switches that have been
changed from default settings will appear in order.
• If no memory switches have been changed from their
default settings, the display will not change and the
buzzer will beep twice.
Press the TEST key.
• The changes will be memorized and the sewing
machine will switch to home position detection standby.
4449Q 4421Q
4961Q
or
key.
4452Q
34