Results - HP Integrity BL890c - i2 Server Manual
Virtual connect ethernet cookbook:single and multi enclosure domain (stacked) scenarios
Hide thumbs
Also See for Integrity BL890c - i2 Server:
- Software manual (44 pages) ,
- Quickspecs (34 pages) ,
- Release note (25 pages)
Table of Contents
Advertisement
Results
The following graphic provides an example of an ESX Server with TWO NICs connected to the network.
Both NICs are configured to support VLANs 101-104. VLAN 101 is the default VLAN and is not tagged.
Port Groups are added to support each VLAN.
Figure 1-63 Both NICs for Profile ESX-1 are connected to the network through Multiple Networks; VLANs are
configured as Port Groups within the virtual switch.
Figure 1-64 Configuring the ESX vSwitch for Multiple Networks / VLANs.
Scenario 1:5 – VLAN Tagging (802.1Q) with a Shared Uplink Set (SUS) with Link Aggregation using LACP (802.3ad) –
VMware ESX 71
Advertisement
Table of Contents
Need help?
Do you have a question about the Integrity BL890c - i2 Server and is the answer not in the manual?