HP Integrity BL890c - i2 Server Manual page 39

The following graphics provide an example of a Windows 2003 server with TWO NICs teamed and
connected to the network. One NIC will be active, the other NIC will be in standby, in the event of an
Uplink, switch or VC module failure; the teaming software will fail the NIC over to the alternate path, as
required.
Figure 1-30 Team both NICs, using the HP Network Configuration Utility.
Figure 1-31 Both NICs for Profile App-1are teamed and could connect connected to the network through either
vNet-PROD-1 or vNet-PROD-2, depending on which NIC is active.
Scenario 1:2 – Multiple Simple Networks with Active\Active Uplinks and Optional Link Aggregation 802.3ad (LACP) - Windows
39