HP Integrity BL890c - i2 Server Manual page 65

Configuring the VC Module for Map VLAN Tags via GUI (Ethernet settings)
Enable Tunnel VLAN Tags within Virtual Connect
•
On the Virtual Connect Manager screen, Left pane, click Ethernet Settings, Advanced Settings
•
Select Map VLAN Tags
•
Select Fast MAC Cache Fail-over with a refresh of 5
•
Select Apply
Configuring the VC Module for Map VLAN Tags via CLI (Ethernet settings)
The following command can be copied and pasted into an SSH based CLI session with Virtual Connect
# Set Advanced Ethernet Settings to "Map VLAN Tags" and Enable Fast MAC cache fail-over
set enet-vlan vlantagcontrol=map sharedservervlanid=false
set mac-cache Enabled=True Refresh=5
Figure 1-57 Ethernet Settings.
Scenario 1:5 – VLAN Tagging (802.1Q) with a Shared Uplink Set (SUS) with Link Aggregation using LACP (802.3ad) –
VMware ESX 65