Fujitsu 6240 - fi - Document Scanner Operator's Manual page 98

3.9 Detecting Multifeeds
The following are how to detect multifeeds:
None
Check overlapping
Check length
Check overlapping and
length
For more information on multifeed detection, see Section
5. Click the [OK] button.
You are returned to the [TWAIN Driver] dialog box.
6. In the [TWAIN Driver] dialog box, click the [OK] button.
Changes made are saved and the [TWAIN Driver] dialog box closes.
Continue scanning in ScandAll PRO.
For information about how to scan documents, see Section
file:///D|/Documents%20and%20Settings/scanner/Desktop/Lynx3/06/contents/EN/03/c03_09_01.htm (2 of 2)9/28/2007 2:38:31 PM
Multifeed detection is not performed.
The scanner monitors the thickness of fed documents. The scanner detects a
multifeed based on an increased thickness when multiple sheets are fed
simultaneously.
The scanner monitors the length of fed documents. The scanner detects a multifeed
based on an increased length when multiple sheets are fed simultaneously.
The scanner monitors both document thickness and length to detect multifeeds.
All Rights Reserved. Copyright 2007 © PFU LIMITED
"7.5 Multifeed Detection Conditions."
"2.6 How to Use ScandAll PRO."