Fujitsu 6240 - fi - Document Scanner Operator's Manual page 174

6.3 Remedying Typical Troubles
fi-6140 / fi-6240 Image Scanner Operator's Guide
6.3 Remedying Typical Troubles
Symptom: Quality of scanned text or lines is unsatisfactory.
Back
Are the upper/lower glasses and rollers inside
the ADF or the document bed and document
holding pad of the Flatbed (fi-6240 only) clean?
Is there any debris (paper powder or dust) on
the document?
If you cannot solve the problem after taking
measures, check the items in Section
Items to Check Before Contacting the Dealer
Where You Bought the Scanner" and contact
the dealer or an authorized FUJITSU scanner
service provider.
file:///D|/Documents%20and%20Settings/scanner/Desktop/Lynx3/06/contents/EN/06/c06_03/05.htm9/28/2007 2:37:46 PM
YES
NO
"6.4
All Rights Reserved. Copyright 2007 © PFU LIMITED
Clean the dirty locations.
(For details on how to clean the dirty locations,
see Chapter "4 DAILY
NO
Remove the debris from the document.
Such debris on the document may be
transferred onto the the upper/lower glasses
and rollers inside the ADF or the document
holding pad of the Flatbed (fi-6240 only),
YES
causing the scanned image dirty.
TROUBLESHOOTING
CONTENTS MAP
TOP
CARE.")