Fujitsu 6240 - fi - Document Scanner Operator's Manual page 74

3.2 Scanning Books [fi-6240 only]
4. Launch ScandAll PRO.
From the [Start] menu, select [All Programs]
Then, ScandAll PRO starts up.
5. From ScandAll PRO, display the setup dialog box of FUJITSU TWAIN 32.
For information about how to display the scanner driver's setup dialog box, see Section
6. Select [Flat Bed] under [Scan Type].
7. Click the [OK] button.
Changes made on this dialog box are saved and the setup dialog box of FUJITSU TWAIN 32 closes.
8. From the ScandAll PRO window, perform a scan.
For information about how to scan documents, see Section
Scanned document images are displayed in the ScandAll PRO window.
9. When scanning ends, re-attach and gently close the document cover.
file:///D|/Documents%20and%20Settings/scanner/Desktop/Lynx3/06/contents/EN/03/c03_02_01.htm (2 of 3)9/28/2007 2:38:21 PM
[Fujitsu ScandAll PRO]
ATTENTION
Do not move the document during scanning.
[Fujitsu ScandAll PRO] in the order presented.
"2.6 How to Use ScandAll PRO."
"2.6 How to Use ScandAll PRO."