Fujitsu 6240 - fi - Document Scanner Operator's Manual page 102

3.11 Outputting Multi-Images
fi-6140 / fi-6240 Image Scanner Operator's Guide
3.11 Outputting Multi-Images
You can obtain both color/grayscale and black-and-white images at a scan (Multi Image Output).
* Depending on the application to use, this function may not work properly.
Configure Multi Image settings using the scanner driver.
Example: When the color document is scanned with Multi Image Output being set
The following shows the procedure to change settings in the setup dialog box of the FUJITSU TWAIN 32 Scanner Driver.
1. From ScandAll PRO, display the setup dialog box of FUJITSU TWAIN 32.
For information about how to display the setup dialog box of the scanner driver, see Section
PRO."
2. In the [TWAIN Driver] dialog box, mark the [Enable Multi Image] checkbox.
* When you select [Long page] under [Scan Type], this checkbox is not available.
file:///D|/Documents%20and%20Settings/scanner/Desktop/Lynx3/06/contents/EN/03/c03_11_01.htm (1 of 3)9/28/2007 2:38:34 PM
Original0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Created image
TROUBLESHOOTING
CONTENTS MAP
TOP
"2.6 How to Use ScandAll