Fujitsu 6240 - fi - Document Scanner Operator's Manual page 171

6.3 Remedying Typical Troubles
fi-6140 / fi-6240 Image Scanner Operator's Guide
6.3 Remedying Typical Troubles
Symptom: The scanning does not start.
Back
Did you unlock the transport lock of the
Flatbed? (fi-6240 only)
Are the document loaded correctly on the ADF
paper chute?
Is the ADF closed completely?
Is the interface cable connected correctly?
Is the connector of interface cable broken?
file:///D|/Documents%20and%20Settings/scanner/Desktop/Lynx3/06/contents/EN/06/c06_03/03.htm (1 of 2)9/28/2007 2:37:44 PM
YES
YES
YES
YES
NO
Turn OFF the scanner and unlock the transport
lock.
(Refer to "2.1 Installing the Scanner in "fi-
NO
6140/fi-6240 Getting Started.")
Load the document correctly on ADF paper
chute.
NO
Remove the document in the ADF paper chute,
open the ADF, and then close it completely.
NO
Connect the interface cable correctly.
(Refer to "2.2 Connecting the Scanner to Your
NO
PC" in "fi-6140/fi-6240 Getting Started.")
Use a new interface cable and correctly
connect it.
YES
TROUBLESHOOTING
CONTENTS MAP
TOP