Fujitsu 6240 - fi - Document Scanner Operator's Manual page 205

8.2 Power Saving Setting
fi-6140 / fi-6240 Image Scanner Operator's Guide
8.2 Power Saving Setting
This scanner switches to Power saving mode automatically to save power consumption when it remains unused for a certain
time.
To configure the Power saving mode, do the following:
1. Start up the Software Operation Panel.
See Section "8.1 Scanner
2. Select [Device Setting] from the left side list in the window.
3. Use the slide control bar to set the waiting time before entering the power saving mode.
You can set the waiting time in the range of 15 to 55 minutes (in steps of 5 min.).
file:///D|/Documents%20and%20Settings/scanner/Desktop/Lynx3/06/contents/EN/08/c08_02_01.htm (1 of 2)9/28/2007 2:38:50 PM
Settings."
TROUBLESHOOTING
CONTENTS MAP
TOP