Fujitsu 6240 - fi - Document Scanner Operator's Manual page 162

6.1 Removing Jammed Documents
fi-6140 / fi-6240 Image Scanner Operator's Guide
6.1 Removing Jammed Documents
If a document jam occurred, follow the procedure below to remove the jammed documents.
1. Remove any documents on the ADF paper chute.
2. Open the ADF by pulling the ADF open lever and turning the ADF to the front.
0 0 0 0 0 0
Be careful, the ADF may close and pinch your finger.
0 0
3. Remove the jammed document.
file:///D|/Documents%20and%20Settings/scanner/Desktop/Lynx3/06/contents/EN/06/c06_01_01.htm (1 of 2)9/28/2007 2:38:39 PM
ATTENTION
Take care not to get injured when removing jammed documents.
Be careful not to get neckties, necklaces, etc. entangled in the scanner when
removing the jammed documents.
The surface of the glass and guides may become hot during operation. Take care not
to get burned.
CAUTION
ATTENTION
Staples, paper clips, etc. cause document jams. Be sure to fully check the document
and feed path, and remove any small metal objects such as these.
Also, before you start scanning, be sure to remove any staples, clips, etc. from the
document.
In case you have scanned stapled or clipped documents, do not pull them out
forcibly. Otherwise, the glass and/or guides may be damaged.
ADF open lever
TROUBLESHOOTING
CONTENTS MAP
TOP