Fujitsu 6240 - fi - Document Scanner Operator's Manual page 125

3.17 Scanning Using Barcodes
fi-6140 / fi-6240 Image Scanner Operator's Guide
3.17 Scanning Using Barcodes
ScandAll PRO supports a job separation function with barcode-printed sheets (hereinafter reffered to as the "barcode"). The
barcode-based job separation function can divide multiple pages of scanned images into pre-determined unit and save them to
different folders separetely without interruption. A PDF or TIFF (multipage) file can be separated and stored as multiple files in
pre-determined document unit. Not only the document counter, but the barcode recognition result strings can be used for the
folder names.
ScandAll PRO is capable of detecting the following types of barcodes:
Code
UPC/EAN/JAN
CODE39
CODABAR
CODE128
The following lists the barcode detection conditions:
Item
Barcode height
Barcode length
Barcode margins
Barcode base color
Resolution
Barcode angle
file:///D|/Documents%20and%20Settings/scanner/Desktop/Lynx3/06/contents/EN/03/c03_17_01.htm (1 of 6)9/28/2007 2:39:16 PM
Character set
Numbers
Numbers/Alphabets/7 symbols
4 start/stop character numbers,
10 alphabets and symbols
Full ASCII
10 mm to 30 mm
300 mm or less
5 mm or more on each side of barcode
White (This may not be recognized correctly depending on the hue of
white color of the paper scanned.)
200 dpi to 600 dpi
Horizontal, and vertical
ATTENTION
Scanning documents having barcode types not defined for this function could
separate the image data wrongly. This may even delete some of the scanned images
depending on how the scan settings are made. Check the document carefully in
advance to see if it has extra barcodes outside the barcode-scanning area. It is
recommended that you reduce the number of barcode types to sense and narrow
the barcode area to detect.
Using the same patch code sheets repeatedly may decrease the recognition
accuracy due to the dirt contaminated on the document. If the patch code sheets
are not recognized correctly or get smudged, make new prints of the patch code
sheets.
Any control characters and any unusable characters such as \/,;:*?"<>| in a file
name are replaced with "_" (underbar).
The barcode may not be recognized correctly depending on the document (skewed),
driver setting and/or printed conditions of barcodes. Operate after ensuring the
barcode is correctly recognized.
TROUBLESHOOTING
CONTENTS MAP
TOP
Digit number
UPC:12
(UPC-A only; includes check digit)
EAN, JAN: 8 or 13 (includes check digit)
1 to 32
(excludes start/stop codes)
1 to 32
(excludes start/stop codes)
1 to 32 (excludes check characters)
Condition