Fujitsu 6240 - fi - Document Scanner Operator's Manual page 105

3.12 Color/Monochrome Auto Detection
fi-6140 / fi-6240 Image Scanner Operator's Guide
3.12 Color/Monochrome Auto Detection
This scanner features automatic detection of color or black-and-white document scans (the term "scan," in this case, refers to a
produced image by scanning).
Scanning color documents produces color (or grayscale) images, and scanning black-and-white documents produces black-and-
white images.
* Depending on the application to use, this function may not work properly.
Configure Multi Image settings using the scanner driver.
The following shows the procedure to change settings in the setup dialog box of the FUJITSU TWAIN 32 Scanner Driver.
1. From ScandAll PRO, display the setup dialog box of FUJITSU TWAIN 32.
For information about how to display the setup dialog box of the scanner driver, see Section
PRO."
2. In the [TWAIN Driver] dialog box, mark the [Enable Multi Image] checkbox.
* When you select [Long page] under [Scan Type], this checkbox is not available.
file:///D|/Documents%20and%20Settings/scanner/Desktop/Lynx3/06/contents/EN/03/c03_12_01.htm (1 of 3)9/28/2007 2:38:36 PM
TROUBLESHOOTING
CONTENTS MAP
TOP
"2.6 How to Use ScandAll