Multifeed Detection - Fujitsu 6240 - fi - Document Scanner Operator's Manual

2.5 How to Use the Scanner Drivers
Pre-picking is a function that prepares the next document for scanning, feeding it to the position at which the
scanning starts beforehand. You can specify whether you want to enable Pre-picking or not from this drop-down
list.
Backing
You can specify the background color, white or black.
Paper Protection
Specify [Enable] to avoid making the document wrinkled or torn during loading.
Specify [Disable] in case paper jams occur frequently during feeding.

Multifeed Detection

Multifeed refers to an error that occurs when more than one sheet of paper is fed into the ADF at the same time.
You can specify based on what (overlap or length) a multifeed error can be detected so that you can stop
scanning at error detection and receive an error message.
Do not stop scanning upon detection
If this checkbox is marked, the scanner ignores multifeed errors and continues scanning.
Multifeed Recovery
Mark the [On] checkbox under [Multifeed Recovery].
Auto-cancel Timer
Scanning is not restarted for the set period of time (minutes) after a multifeed error. If scanning is not started
after the set minutes, the application is notified of the error by the driver. Note that if the Auto-cancel Timer is set
to 0, the application will never be notified of the error.
[Gamma] Tab
file:///D|/Documents%20and%20Settings/scanner/Desktop/Lynx3/06/contents/EN/02/c02_05_01.htm (12 of 18)9/28/2007 2:38:14 PM