Fujitsu 6240 - fi - Document Scanner Operator's Manual page 218

8.7 Pre-Pick
fi-6140 / fi-6240 Image Scanner Operator's Guide
8.7 Pre-Pick
To scan documents consecutively, you can previously pick the document to be scanned next. This operation is called Pre-Pick.
By enabling Pre-Pick, the time interval between the scanning of two separate documents can be shortened.
Configure the settings for the Pre-Pick as follows:
1. Start up the Software Operation Panel.
See Section "8.1 Scanner
2. Select [Device Setting 2] from left side list in the window, and select [Pre-Pick] from its lower
level.
3. Select [Yes] or [No] for Pre-Pick.
file:///D|/Documents%20and%20Settings/scanner/Desktop/Lynx3/06/contents/EN/08/c08_07_01.htm (1 of 2)9/28/2007 2:38:57 PM
Settings."
TROUBLESHOOTING
CONTENTS MAP
TOP