Using As A Fax; Sending A Fax; Review Commands; Receiving A Fax - Muratec MFX-2500 Operating Instructions Manual

Using as a Fax

The following is a basic fax features. If you want to use one-touch keys or any other
advanced features, See "Fax Reference".

Sending a fax

1
Press to change to the Fax mode, if it is in Copy mode.
FAX
2
Set the document(s) in or
ADF
3
Adjust resolution and contrast, if necessary.
Press to change the resolution.
RESOLUTION
Press to change the contrast.
CONTRAST
4
Adjust memory transmission, if necessary.
Press
MEMORY TRANSMISSION
5
Enter the fax number.
6
Press .
START
If you use , press [Exit] after scanning is finished.
FBS
Important: If you want to cancel a transmission while scanning the docu-
ment, press
STOP
If you want to cancel a transmission in progress, use the Review
Commands function. See "Review Commands" next.
.
FBS
to toggle memory transmission on and off.
.

Review Commands

The Review Commands function gives you the power to check on each job (or
command) in your machine's memory. It also lets you cancel a command if you
decide not to send the document.
To cancel a command:
1
Press .
REVIEW COMMANDS
2
Select the command you want to cancel by cursor key.
3
Press [Cancel].
Note: If you want to stop reviewing the stored commands, press
return the machine to standby mode.
For more information on the Review Commands function, see page 2.11 in "Fax
Reference".

Receiving a fax

A received fax is printed automatically even when the machine is in Copy mode or
Auto power off mode.
Your machine has five different reception modes — Tel Ready, Fax Ready, Fax/Tel
Ready, Tel/Fax Ready and Ans/Fax Ready. Your machine is set to Fax Ready mode
for default. If you want to change the reception mode, see pages 1.12-1.13 in "Fax
Reference". We'll explain each of these and the operation of how to set the reception
mode in that page.
Getting started
to
RESET
1.19