Using Phone Settings; Customizing Rings And Message Indicators - Cisco 7906 Manual

Using Phone Settings

You can personalize your Cisco Unified IP Phone by adjusting the ring tone, background image, and
other settings.

Customizing Rings and Message Indicators

You can customize how your phone indicates an incoming call and a new voice message. You can also
adjust the ringer volume for your phone.
If you want to...
Change the ring tone
Change the ring pattern
(flash-only, ring once,
beep-only, etc.)
Adjust the volume level for
the phone ringer
Change the way that the
voice message light on your
handset works
Cisco Unified IP Phone 7906G and 7911G for Cisco Unified CallManager 5.1 (SCCP and SIP)
Then...
1. Press and select Settings > User Preferences > Rings.
2. Select a ring tone and press Play to hear a sample.
3. Press Save to set the ring tone, or press Cancel.
1. Log in to your User Options web pages. (See
Options Web Pages, page
2. Access your call ring pattern settings. (See
Settings on the Web, page
Note Before you can access this setting, your system administrator might
need to enable it for you.
Press the Volume button while the handset is in the cradle. The new
ringer volume is saved automatically.
1. Log in to your User Options web pages. (See
Options Web Pages, page
2. Access your message indicator settings. (See
Settings on the Web, page
Note Typically, the default system policy is to indicate a new voice
message by displaying a steady light on the handset light strip.
Accessing Your User
45.)
Controlling Line
51.)
Accessing Your User
45.)
Controlling Line
51.)
Using Phone Settings
35