Starting And Joining A Standard Conference - Cisco 7906 Manual

Unified ip phone for cisco unified callmanager 5.1 (sccp and sip)
Hide thumbs Also See for 7906:
Table of Contents

Advertisement

Standard Conference Calls
You can create a standard conference in different ways, depending on your needs and the softkeys
available on your phone:
• Confrn—Use this softkey to establish a standard conference by calling each participant. Standard
conference calling is a default feature available on most phones.
• Join—Use this softkey to establish a standard conference by joining several calls already in
progress on one line. (SCCP phones only.)
• cBarge—Use this softkey to add yourself to an existing call on a shared line and to turn the call
into a standard conference call. This feature is available only on phones that use shared lines.
See
Starting and Joining a Standard Conference, page 21
Meet-Me Conference Calls
You can create a Meet-Me conference by calling the Meet-Me phone number at a specified time.
See
Starting or Joining a Meet-Me Conference Call, page 23

Starting and Joining a Standard Conference

A standard (ad hoc) conference allows at least three participants to talk on a single call.
If you want to...
• Create a conference by
calling participants
• Add new participants to
an existing conference
Create a conference by joining
two or more existing calls
(SCCP phones only)
Participate in a conference
Cisco Unified IP Phone 7906G and 7911G for Cisco Unified CallManager 5.01 (SCCP and SIP)
Then...
1. From a connected call, press Confrn. (You may need to press the
more softkey to see Confrn.)
2. Enter the participant's phone number.
3. Wait for the call to connect.
4. Press Confrn again to add the participant to your call.
5. Repeat to add additional participants.
1. Make sure that you have two or more calls on a single line.
2. Highlight a call that you want to add to the conference.
3. Press Select.
The selected call displays this icon
4. Repeat this process for each call that you want to add.
5. From one of the selected calls, press Join. (You may need to press
the more softkey to see Join.)
Note
The active call is automatically selected.
Answer the phone when it rings.
for additional instructions.
for additional instructions.
.
Basic Call Handling
21

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents