Table of Contents
Advertisement
Using Handsfree Speakerphone
The handsfree feature allows you to speak to someone without using the
handset or headset. Your phone must be in either the Speaker or Speaker/
Headset audio mode. You can set your desired audio mode using the
Headset Settings option from the Options list. For more information, see
the section "Customizing Your Phone" in the 55i Installation Guide.
IP Phone UI
• To dial using handsfree, first press
tone.
• If in speaker audio mode, press
handset.
• If in speaker/headset audio mode, press
handsfree and headset.
• When the handset is on hook, press
call.
When handsfree is on, the speaker light turns on.
Using a Headset
The 55i accepts headsets through the modular RJ22 jack on the back of the
phone. Contact your telephone equipment retailer or distributor to
purchase a compatible headset.
Note: Customers should read and observe all safety recommendations contained in
headset operating guides when using any headset.
Advanced Volume Controls for the Headset Mic
On the 55i, there are 3 options for the headset microphone volume.
IP Phone UI
To change this volume
1. Press
2. Use
to scroll down the list of options to Headset Settings and press
Show.
or
3. Press the list number to jump directly to this option, and press Show.
4. Press
to scroll down to headset/mic volume and press Show.
5. Use
to scroll down the list and press Show to select your desired
volume.
80
Model 55i IP Phone User Guide
to enter the Options list.
and enter a number at the dial
to switch between handsfree and
to switch between
to disconnect a handsfree
Advertisement
Table of Contents
