Aastra 55i IP Phone User Manual
  1. Manuals
  2. Brands
  3. Aastra Manuals
  4. IP Phone
  5. 55I IP
  6. User manual

Aastra 55i IP Phone User Manual

Aastra telecom user guide telephone 55i ip phone
Hide thumbs Also See for 55i IP Phone:
Table of Contents

Advertisement

Quick Links

See also: Installation Manual
55i IP Phone
User Guide
Release 2.1
41-001200-00
Rev 01

Advertisement

Table of Contents
loading

Related Manuals for Aastra 55i IP Phone

Summary of Contents for Aastra 55i IP Phone

  • Page 1 55i IP Phone User Guide Release 2.1 41-001200-00 Rev 01...
  • Page 2 Aastra Telecom does not accept liability for any damages and/or long distance charges, which result from unauthorized and/or unlawful use. While every effort has been made to ensure accuracy, Aastra Telecom is not liable for technical or editorial errors or omissions contained within this documentation.

  • Page 3: Software License Agreement

    Vertical Communications will not be liable for technical or editorial errors or omissions contained within this documentation. The information contained in this documentation is subject to change without notice. Copyright 2007 (under-license) All Rights Reserved. Model 55i IP Phone User Guide...

  • Page 5: Table Of Contents

    Table of Contents Software License Agreement ... iii About this Guide...1 Documentation...1 Introduction ...2 Phone Features... 2 Requirements... 3 Installation and Setup ... 3 Getting Started...4 Plugging in and Starting the Phone ... 4 Network Connected/Network Disconnected ... 8 Idle Screen ... 9 IP Phone Keys and Key Descriptions* ...13 Key Descriptions ...
  • Page 6 Table of Contents "Do not Disturb" (DND) Key ... 67 Busy Lamp Field (BLF) Key... 69 BLF List Key... 71 Automatic Call Distribution (ACD) Key (for Sylantro Servers)... 74 Directed Call Pickup/Group Call Pickup Keys (for Sylantro Servers)... 79 XML Key... 82 Flash Key...
  • Page 7 Table of Contents Additional Features...152 Star Codes... 152 Suppress DTMF Playback ... 152 Display DTMF Digits... 154 Enable/Disable Call Waiting ... 155 Play Call Waiting Tone ... 157 Stuttered Dial Tone... 158 XML Beep Support ... 159 Status Scroll Delay ... 160 Incoming Call Interrupts Dialing...

  • Page 9: About This Guide

    This Installation Guide is included in the box with your phone. • Aastra 55i IP Phone User Guide – Describes the most commonly used fea- tures and functions for an end user. This User Guide can be downloaded from www.aastratelecom.com.

  • Page 10: Introduction

    • Inline power support (based on 802.3af standard) which eliminates power adapters. • AC power adapter (included) • Enhanced busy lamp fields* • Set paging* Availability of feature dependant on your phone system or service provider Model 55i IP Phone User Guide...

  • Page 11: Requirements

    Requirements The 55i IP Phone requires the following environment: • SIP-based IP PBX system or network installed and running with a SIP account created for the 55i IP phone. • Access to a Trivial File Transfer Protocol (TFTP), File Transfer Protocol (FTP), Hypertext Transfer Protocol (HTTP) server, or Hyper Text Transfer Protocol over Secure Sockets Layer (SSL) (HTTPS).

  • Page 12: Getting Started

    The 55i automatically begins the start up sequence as soon as it is connected. The phone goes through this process the first time you plug in your phone and every time you restart your phone. The phone displays the following startup screens. Checking for Firmware... Model 55i IP Phone User Guide...
  • Page 13 Important! Do not unplug or remove power to the phone while it is checking or installing firmware and configuration information. DHCP: waiting for IP... Checking for firmware... Do not unplug the phone! Model 55i IP Phone User Guide...
  • Page 14 If language packs were loaded to your phone by your System Administrator, the following screen displays during startup. When the configuration update is complete, the phone displays the following screens and then displays the Idle screen.. Network Model 55i IP Phone User Guide Downloading Language Packs Done...
  • Page 15 John Smith Sat Jan 1 12:18am Idle Screen Model 55i IP Phone User Guide...

  • Page 16: Network Connected/Network Disconnected

    Connected" prompt for a few seconds. However, if changes have been made to your phone’s network settings, you may need to restart your phone. For more information about connecting your phone, see the Aastra 55i IP Phone Installation Guide, the section "Connecting to the Network and to Power".

  • Page 17: Idle Screen

    Directory, Callers List, and Intercom, respectively. You can configure the 6 top programmable keys with up to 6 functions, and the 6 bottom softkeys with up to 20 functions as required. Services Directory Callers List John Smith Sat Jan 1 12:18am Model 55i IP Phone User Guide Intercom...
  • Page 18 Softkeys Services Configured Callers Sat Jan 1 12:18am Home Office Idle Screen 10 Model 55i IP Phone User Guide page 111. page 121. page 131. Icom John Smith page Home Office...
  • Page 19 To access your voicemail messages, use the star codes for your system if a voicemail softkey has not been configured on your phone. For more information on your system’s star codes, please refer to the documentation for the voicemail system you are using. Model 55i IP Phone User Guide...
  • Page 20 Sat Jan 1 12:18am John Home Matt Office More Idle Screen Note: The bottom set of 6 softkeys map to the current state-based configurable softkeys. 12 Model 55i IP Phone User Guide John Smith > Dial Conf Xfer More John Smith >...

  • Page 21: Ip Phone Keys And Key Descriptions

    The following sections describe the various 55i phone key functions, and how they help you make and manage your calls and caller information. Key Descriptions The following table identifies the keys on the key panel of your 55i IP phone that you can use for handling calls. Keys Goodbye key - Ends an active call.
  • Page 22 Key Description Line/Call Appearance key - Connects you to a line or call. The Aastra 55i IP phone supports up to 4 line keys. Handsfree key - Activates Handsfree for making and receiving calls without lifting the handset. When the audio mode option is set, this key is used to switch between a headset and the handsfree speakerphone.
  • Page 23 6 have no assigned functions. All 6 keys are programmable and can be assigned to perform specific functions. The following are the default functions for the programmable keys on the 55i IP phone: 1 - Services 2 - Dir 3 - Callers...

  • Page 24: Methods For Customizing Your Phone

    Note: *The "Administrator Menu" options are administrator level functions only, and are not accessible by the user. These options should only be set up and changed by your system administrator. 16 Model 55i IP Phone User Guide key on the IP Phone Option Call Forward 1.
  • Page 25 Ring Tone Tone Set 2. Contrast Level 3. Live Dialpad 4. Set Audio Audio Mode Headset Mic Vol Phone Status 1. IP&MAC Addresses 2. LAN Port 3. PC Port 4. Firmware Info Phone Lock Model 55i IP Phone User Guide...
  • Page 26 IP Phone UI, see the section For more information about administrator options, contact your System Administrator. 18 Model 55i IP Phone User Guide on the phone to enter the Options List. to scroll through the list, or press the num-...

  • Page 27: Phone Options Via The Aastra Web Ui

    2. At the prompt, enter your username and password and click The Network Status window displays for the IP phone you are accessing. Note: For a user, the default user name is “user” and the password field is left blank.. page Model 55i IP Phone User Guide...
  • Page 28 3. You can logout of the Aastra Web UI at any time by clicking Log Off. 20 Model 55i IP Phone User Guide...
  • Page 29 Reset - Allows you to restart the IP phone when required. • sprecode • park • pickup • Last Call Return (lcr) • Directory • Callers List • Intercom • Services • Phone Lock • Empty (not available for Programmable Keys) Model 55i IP Phone User Guide...
  • Page 30 Call Forward - Allows you to set a phone number destination for where you want calls forwarded. Call forward can be configured using a specific mode (off, all, busy, no answer, busy no answer) on a global or per-line basis. 22 Model 55i IP Phone User Guide...

  • Page 31: Phone Status

    3. Select the option you want to view: IP&MAC Address LAN Port PC Port Firmware Info The option you select displays to the LCD. Use the through the LCD display. keys to scroll the Model 55i IP Phone User Guide...

  • Page 32: Finding Your Phone's Ip Address

    Use the IP Address to enter into your browser window to access the phone via the Aastra Web UI. For more information about using the Aastra Web UI, see "Phone Options via the Aastra Web UI" 24 Model 55i IP Phone User Guide Options List 1. Call Forward 2. Preferences 3.

  • Page 33: Phone Status Via The Aastra Web Ui

    Status Screen. This screen is view only. It displays the Network Status of your phone which includes the following: • LAN Port • PC Port • MAC Address • Hardware Information • Firmware Information Model 55i IP Phone User Guide...

  • Page 34: Customizing Your Phone

    The following table identifies the valid settings and default values for each type of configuration method. Configuration Method IP Phone UI Aastra Web UI 26 Model 55i IP Phone User Guide Ring Tones Table Valid Values Global: Tone 1 Tone 2...
  • Page 35 8. Select the country for which you want to apply the tone set. Valid values are Aus- tralia, Europe, France, Germany, Italy, UK, Mexico, and US. Default is US. 9. Press Done. The ring tone and tone set you select is immediately applied to the IP phone. Model 55i IP Phone User Guide...

  • Page 36: Aastra Web Ui

    4. In the "Ring Tone" section, select a line for which you want to set ring tone. 5. Select a value from the "LineN" field Note: See the Ring Tones Table 6. Click to save your settings. 28 Model 55i IP Phone User Guide page 26 for valid values. page 26 for valid values.

  • Page 37: Contrast Level

    5. Use the 3 and 4 nagivation buttons to increase or decrease the intensity of con- trast lighting on the LCD. 6. Press Done to save your selection. Display 1. Contrast Level 2. Backlight Done - Contrast Level Contrast Level: Cancel - Done - Model 55i IP Phone User Guide...

  • Page 38: Backlight

    5. Use the navigation buttons to select the Backlight status for your phone. Default is "ON". Available options are: • Off • On (Default) • Auto 30 Model 55i IP Phone User Guide Display 1. Contrast Level 2. Backlight Done -...
  • Page 39 - Backspace - Clear 9. Press Done to save your setting. Backlight Auto Cancel - Done - Backlight Auto Advanced - Cancel - Done - Backlight On Time 10 seconds Cancel - Done - Model 55i IP Phone User Guide...

  • Page 40: Live Dialpad

    The "Live Dialpad" option on the IP phone turns the Live Dial Pad mode ON or OFF. With live dial pad ON, the 55i IP phone automatically dials out and turns ON Handsfree mode as soon as a dial pad key or softkey is pressed. With live dial pad OFF, if you dial a number while the phone is on-hook, lifting the receiver or pressing initiates a call to that number.

  • Page 41: Set Audio

    Incoming calls are sent to the handsfree speakerphone first button is pressed. By pressing the button button is pressed. By pressing the button again, Model 55i IP Phone User Guide button on the phone button on the...
  • Page 42 5. Select the audio mode you want to use on your phone. Default is Speaker. Valid values are: Speaker (Default) Headset Speaker/Headset Headset/Speaker 6. Press Done to save your setting. 34 Model 55i IP Phone User Guide Set Audio 1. Audio Mode 2. Headset Mic Volume Done - Audio Mode Speaker...
  • Page 43 8. Select the Low, Medium, or High volume level. Default is Medium. 9. Press Done to save your selection. Set Audio 1. Audio Mode 2. Headset Mic Volume Done - Headset Mic Volume Medium High Cancel - Model 55i IP Phone User Guide Done -...

  • Page 44: Time And Date

    Options List. 2. Select Preferences. 3. Select Time and Date. 4. Select Set Time. - Select 36 Model 55i IP Phone User Guide Time and Date 1. Time Zone 2. Daylight Savings 3. Time Format 4.
  • Page 45 Time Format Time Format: Cancel - Done - Time and Date 1. Time Zone 2. Daylight Savings 3. Time Format 4. Date Format 5. Time Server 6. Set Time 7. Set Date Done - Model 55i IP Phone User Guide...
  • Page 46 • Jan 2 • 2 Jan 2000 • Sun 2 Jan • 2 Jan • 02.01.2000 8. Press Done to save the Date Format. 38 Model 55i IP Phone User Guide Set Date Enter Date (y-m-d): 2000-01-02 Cancel - Date Format...
  • Page 47 1. Time Zone 2. Daylight Savings 3. Time Format 4. Date Format 5. Time Server 6. Set Time 7. Set Date Done - Codes.”. Time Zone US-Aleutain US-Central US-Eastern US-Hawaii United States Cancel - Done - Model 55i IP Phone User Guide...
  • Page 48 • 30 min summertime • 1h summertime • Automatic (Default) 4. Press Done to save the Daylight Savings value you selected. 40 Model 55i IP Phone User Guide Time and Date 1. Time Zone 2. Daylight Savings 3. Time Format 4.
  • Page 49 • MMM DD • DD MMM YYYY • WWW DD MMM • DD MMM • DD.MM.YYYY Note: The date and date format you configure display on the phone’s idle screen. 4. Click to save your settings. Model 55i IP Phone User Guide...

  • Page 50: Language

    System Administrator. 4. Press Done to set the language on the phone. The change is dynamic. When you exit the Options Menu, the phone displays all menu items in the language you selected. 42 Model 55i IP Phone User Guide...
  • Page 51 System Administrator. English is the default language and cannot be changed or removed. 3. Click to save your settings. The change is dynamic. The Aastra Web UI displays all screens in the language you selected. Model 55i IP Phone User Guide...

  • Page 52: User Password

    5. At the "Re-enter Password:" promot, re-enter the new user password and press Enter. A message, "Password Changed" displays on the screen. 44 Model 55i IP Phone User Guide Then you need to: use that new password to log into the Aastra Web UI.
  • Page 53 ” (all lowercase) and the password field is left blank. 3. In the "New Password" field, enter the new user password. 4. In the "Password Confirm" field, enter the new user password again. 5. Click to save your changes. Model 55i IP Phone User Guide...

  • Page 54: Resetting A User Password

    3. In the "Current Password" field, leave this blank. 4. In the "New Password" field, enter a new password. 5. In the "Password Confirm" field, re-enter your new user password. 6. Click to save your settings. 46 Model 55i IP Phone User Guide...

  • Page 55: Restarting Your Phone

    Restart softkey. If you do not wish to restart your phone, press Cancel. Note: Your phone is out of service temporarily during the restart and down- loading process. Aastra Web UI 1. Click on Operation->Reset. 2. Click 3. Click OK at the confirmation prompt. Model 55i IP Phone User Guide...

  • Page 56: Phone Lock

    1. Press on the phone to enter the Options List. 2. At the prompt, "To unlock the phone", enter your user password and press Enter.. The phone unlocks. 48 Model 55i IP Phone User Guide "Phone Lock Key" page 108.
  • Page 57 The phone locks dynamically and displays the following message: "Phone is locked". Unlock the Phone 3. Click on Operation->Phone Lock. 4. In the "Unlock the Phone?" field, click The phone unlocks dynamically and displays the following message: "Phone is unlocked". Model 55i IP Phone User Guide...

  • Page 58: Defining An Emergency Dial Plan

    A police and/or fire emergency number in Asia, Europe, Middle East, and South America. You can set the emergency dial plan using the Aastra Web UI. 50 Model 55i IP Phone User Guide...
  • Page 59 911|110 Default for this field is 911|999|112|110. 3. Click to save the emergency dial plan to your phone. Reference For more advanced options you can set on your phone, see page 152. "Additional Features" Model 55i IP Phone User Guide...

  • Page 60: Line Keys, Programmable Keys, And Softkeys

    The display shows which line the call information is referring to (L1, L2, L3, L4, etc.), the Caller ID information (name and number, if available), the call status (Connected, Ring, Hold, etc.) and the timer specific to that call. 52 Model 55i IP Phone User Guide Programmable Keys Softkeys...

  • Page 61: Softkeys And Programmable Keys

    36 softkeys on each 536M Expansion Module and up to 60 softkeys on each 560M Expansion Module. (The 55i IP Phone allows up to 3 expansion modules on each phone). For more information about expansion modules, see 560M Expansion Modules"...

  • Page 62: Key Function

    Park Pickup Last Call Return (lcr) Services (Top Key 1 by Default) 54 Model 55i IP Phone User Guide Description Indicates key is configured for Busy Lamp Field (BLF) use. A user can dial out on a BLF configured key.
  • Page 63 Indicates the the key is configured to be used for intercom calls. Indicates key is configured as a phone lock key, allowing you to press this key to lock/unlock the phone. Indicates key is configured as an empty key. Model 55i IP Phone User Guide...

  • Page 64: State-Based Softkeys (Bottom Keys Only)

    Auto Call idle Distribution (ACD) Directed Call idle, connected, incoming, outgoing, busy Pickup (DCP) Group Call Pickup (GCP) idle, connected, incoming, outgoing, busy 56 Model 55i IP Phone User Guide (Bottom Keys only) Softkeys (state-based)
  • Page 65 Phone Lock All states disabled. In the Aastra Web UI, the operational states for each softkey display enabled. To disable a state, you uncheck the box for that state. Model 55i IP Phone User Guide...
  • Page 66 Key Display Behavior On the 55i IP Phone, you can configure up to 20 functions on the softkeys. If you have no softkeys configured on the IP Phone, and you assign softkey functions to higher number keys in the Aastra Web UI, the key functions automatically appear in the first available position on the LCD display.
  • Page 67 John Smith Key 12 displays in Sat Jan 1 12:18am softkey position 1 on the phone - LAB Model 55i IP Phone User Guide...

  • Page 68: Line Key

    9 (4 line/call appearance hard keys plus 5 softkeys or programmable keys). If all line/call appearances have been set up between two different numbers, a total of 8 lines can be configured. 60 Model 55i IP Phone User Guide page John Smith...
  • Page 69 Previous and Next softkeys. You use the Aastra Web UI to set a programmable key or softkey as a line. appear on the display. By using the Model 55i IP Phone User Guide navigation...
  • Page 70 Valid values are 5 through 9. 6. If configuring a softkey, in the state fields, check (enable) or uncheck (disable) the states you want to apply to this softkey. 7. Click to save your changes. 62 Model 55i IP Phone User Guide page 52.

  • Page 71: Speeddial Key

    You can save up to 30 speeddial numbers on the 55i. Use the following procedures to set speeddial on the 55i IP phone. Model 55i IP Phone User Guide...
  • Page 72 You can enter up to 16 letters in the "Enter Name:" field. Press the key to move to the next field. 64 Model 55i IP Phone User Guide Enter Name: Enter Number: Line: 1...
  • Page 73 Enter Number: Line: 1 - Save - Backspace Cancel - - 123 Enter Name: John Smith Enter Number: 555-6789 Line: 1 - Save - Backspace Change - Cancel - - 123 Model 55i IP Phone User Guide key to select...
  • Page 74 7. If configuring a softkey on the Bottom Keys, in the state fields, check (enable) or uncheck (disable) the states you want to apply to this softkey. 8. Click to save your changes. 66 Model 55i IP Phone User Guide...

  • Page 75: Do Not Disturb" (Dnd) Key

    Use the following procedure to set a key to function as "Do Not Distrub". The procedure shows the softkey screens as an example. 1. Click on Operation->Softkeys and XML. Click on Operation->Programmable Keys. Click on Operation->Expansion Module <N>. Model 55i IP Phone User Guide...
  • Page 76 4. If configuring a softkey on the Bottom Keys, in the state fields, check (enable) or uncheck (disable) the states you want to apply to this softkey. 5. Click to save your changes. 68 Model 55i IP Phone User Guide...

  • Page 77: Busy Lamp Field (Blf) Key

    BLF key. When the monitored user is on an active call, a small telephone icon is shown with the handset off-hook. Note: You can also use a BLF configured key to dial out. Contact your System Administrator for more information Model 55i IP Phone User Guide...
  • Page 78 7. If configuring a softkey on the Bottom Keys, in the state fields, check (enable) or uncheck (disable) the states you want to apply to this softkey. 8. Click to save your changes. 70 Model 55i IP Phone User Guide...

  • Page 79: Blf List Key

    Note: The Broadworks BLF feature is not the same as the Broadworks Shared Call Appearance (SCA) feature and does not permit call control over the monitored extension. Model 55i IP Phone User Guide...
  • Page 80 1. Click on Operation->Softkeys and XML. Click on Operation->Programmable Keys. Click on Operation->Expansion Module <N>.. 2. For softkeys, select from "Key 1" through "Key 20". For programmable keys, select from "Key 1" through "Key 6". 72 Model 55i IP Phone User Guide...
  • Page 81 6. In the "BLF List URI" field, enter the name of the BLF list defined on the Broad- Soft BroadWorks Busy Lamp field page for your particular user. For example, my55i-blf-list@as.broadworks.com. Note: Contact your System Administrator for the BLF List URI. 7. Click to save your changes. Model 55i IP Phone User Guide...

  • Page 82: Automatic Call Distribution (Acd) Key (For Sylantro Servers)

    You can also choose to manually change the phone status to unavailable by pressing the "Unavailable" softkey on the phone. Note: It is recommended you configure no more than a single ACD softkey, programmable key, or Expansion Module key per IP phone. 74 Model 55i IP Phone User Guide...
  • Page 83 Configuring an Automatic Call Distribution (ACD) Key Aastra Web UI Use the following procedure to configure ACD on the 55i IP Phone. The procedure shows the softkey screens as an example. 1. Click on Operation->Softkeys and XML. Click on Operation->Programmable Keys.
  • Page 84 LED as they may appear on your IP phone. Phone Status: Logged In Model and Available Solid Red LED icon 76 Model 55i IP Phone User Guide Status: Unavailable Logged Out Blinking Red LED No LED Blinking icon icon...
  • Page 85 Use the Cancel softkey to cancel the ACD login. Your phone logs into the queue on the server. Services Icom Callers Mon Jan 2 10:37am Support Services Icom Callers ACD: Support User ID: Password: Backspace Log In Cancel Model 55i IP Phone User Guide...
  • Page 86 Contact your System Administrator for more information. 8. To logout of the queue, press the Log Out softkey. The server no longer distrib- utes phone calls to your IP phone. 78 Model 55i IP Phone User Guide Services Icom Callers...

  • Page 87: Directed Call Pickup/Group Call Pickup Keys (For Sylantro Servers)

    Configuring Directed Call Pickup (DCP) Key(for Sylantro Servers) Aastra Web UI Use the following procedure to configure Directed Call Pickup on the 55i IP Phone. The procedure shows the softkey screens as an example. 1. Click on Operation->Softkeys and XML.
  • Page 88 Configuring Group Call Pickup (GCP) Key (for Sylantro Servers) Aastra Web UI Use the following procedure to configure Group Call Pickup on the 55i IP Phone. The procedure shows the softkey screens as an example. Note: A ring group must be configured on the Sylantro Server in order for a GCP softkey to function.
  • Page 89 3. Press the Pickup Key for the extension you select. The call is answered. Select an extension Press the Pickup Key to answer the call Services Icom Callers DCP on line: 1. 2201 2. 2202 3. 2203 - Pickup - Cancel Model 55i IP Phone User Guide...

  • Page 90: Xml Key

    Note: The XML services must be set up by your System Administrator before you can use the key. Contact your System Administrator for more infor- mation. On the 55i IP phone, you can access the XML applications from the IP Phone UI in two ways: • Via the "Services" menu •...
  • Page 91 Services Menu after pressing the Services key. If multiple XML applications are specified in the XML Application URI field, a list of applica- tions displays after pressing the Services key. 7. Click to save your changes. Model 55i IP Phone User Guide...
  • Page 92 Setting an XML Key Aastra Web UI Use the following procedure to configure an XML key on the 55i IP Phone. The procedure shows the softkey screen as an example. 1. Click on Operation->Softkeys and XML. Click on Operation->Programmable Keys.
  • Page 93 Message services display to the screen after pressing the softkey or programmable key. For user input services, follow the prompts as appropriate. 4. To exit from the "Services" menu, press the Services key again. Model 55i IP Phone User Guide...
  • Page 94 Message services display to the screen after pressing the programmable key. For user input services, follow the prompts as appropriate. 4. To exit from the "Customized Features" screen, press the XML key again. 86 Model 55i IP Phone User Guide...

  • Page 95: Flash Key

    Setting a Flash Key Aastra Web UI Use the following procedure to configure a Flash key on the 55i IP Phone. The procedure shows the softkey screen as an example. 1. Click on Operation->Softkeys and XML.

  • Page 96: Sprecode Key

    Contact your System Administrator for information about available services. Setting a Sprecode Key Aastra Web UI Use the following procedure to configure a Sprecode key on the 55i IP Phone. The procedure shows the softkey screen as an example. 1. Click on Operation->Softkeys and XML.
  • Page 97 Note: For values to enter in this field, contact your System Administrator. 6. If configuring a softkey on the Bottom Keys, in the state fields, check (enable) or uncheck (disable) the "Connected" state to apply to this softkey. 7. Click to save your changes. Model 55i IP Phone User Guide...

  • Page 98: Park/Pickup Keys

    • Using a programmable configuration (using keys) Note: The IP phone accepts both methods of configuration. However, to avoid redundancy, Aastra Telecom recommends you configure either a static configuration or a programmable configuration. The IP phone supports the Park/Pickup feature on the Asterisk, BroadWorks, Sylantro, and ININ PBX servers.
  • Page 99 3. Enter a server value in the "Pickup Parked Call" field. Note: For values to enter in this field, see the table Configuration Values" 4. Click to save your changes. Park Values* Pickup Values* callpark "Park/Pickup Call Server page "Park/Pickup Call Server page Model 55i IP Phone User Guide pickup...
  • Page 100 Park configuration is "connected". The default state of the Pickup configuration is "idle, outgoing". Note: Applicable values depend on the server in your network (Asterisk, BroadWorks, Sylantro, ININ PBX. See the table Server Configuration Values" 92 Model 55i IP Phone User Guide "Park/Pickup Call page...
  • Page 101 Use the following procedure to configure the Park/Pickup call feature using the key configuration method. Aastra Web UI Use the following procedure to configure a Park/Pickup key on the 55i IP Phone. The procedure shows the softkey screen as an example. 1. Click on Operation->Softkeys and XML.
  • Page 102 12.If configuring a softkey on the Bottom Keys, in the state fields, check (enable) or uncheck (disable) the "Idle" and "Outgoing" states to apply to this softkey. 13.Click to save your changes. 94 Model 55i IP Phone User Guide "Park/Pickup Call Server page...
  • Page 103 1. Pick up the handset on the phone. 2. Enter the extension number where the call was parked. 3. Press the "Pickup" key. If the call pick up is successful, you are connected with the parked call. Model 55i IP Phone User Guide...

  • Page 104: Last Call Return (Lcr) Key (Sylantro Servers Only)

    Setting a Last Call Return Key Aastra Web UI Use the following procedure to configure a Last Call Return key on the 55i IP Phone. The procedure shows the softkey screen as an example. 1. Click on Operation->Softkeys and XML.
  • Page 105 Valid values are 1 through 9. 5. If configuring a softkey on the Bottom Keys, in the state fields, check (enable) or uncheck (disable) the states you want to apply to this softkey. 6. Click to save your changes. Model 55i IP Phone User Guide...

  • Page 106: Services Key

    151 Note: Your System Administrator can create a custom Services key for your application. For more information about custom Services, see zable Callers List Key and Services Key" 98 Model 55i IP Phone User Guide page 131 "Customi- page...
  • Page 107 Setting Services Key Aastra Web UI Use the following procedure to configure a Services key on the 55i IP Phone. The procedure shows the programmable key screen as an example. Note: By default, Key 1 on the top set of programmable keys is configured for Services.

  • Page 108: Directory Key

    In addition to creating a Directory key, you can also download a Directory List to your PC if required using the Aastra Web UI. Reference For more information about the Directory List, see 100 Model 55i IP Phone User Guide "Directory List" page 131.
  • Page 109 Setting Directory Key Aastra Web UI Use the following procedure to configure a Directory key on the 55i IP Phone. The procedure shows the programmable key screen as an example. Note: By default, Key 2 on the top set of programmable keys is configured for Directory.

  • Page 110: Callers List Key

    Callers List Key. This allows you to configure the Callers List Key with other functions if required. Contact your System Administrator for more information. Reference For more information about the Callers List, see 102 Model 55i IP Phone User Guide "Callers List" page 141.
  • Page 111 Setting Callers List Key Aastra Web UI Use the following procedure to configure a Callers List key on the 55i IP Phone. The procedure shows the programmable key screen as an example. Note: By default, Key 3 on the top set of programmable keys is configured for Callers List.

  • Page 112: Intercom Key

    You can use the Intercom key to automatically connect with a remote extension for outgoing calls, and to answer an incoming intercom call. Reference For more information about the Intercom key, see 104 Model 55i IP Phone User Guide Intercom "Using Intercom" page...
  • Page 113 Setting an Intercom Key Aastra Web UI Use the following procedure to configure a Callers List key on the 55i IP Phone. The procedure shows the programmable key screen as an example. Note: By default, Key 4 on the top set of programmable keys is configured for Intercom.

  • Page 114: None Key

    "Key Display Behavior" Setting a None Key Aastra Web UI Use the following procedure to configure a None key on the 55i IP Phone. The procedure shows the softkey screen as an example. 1. Click on Operation->Softkeys and XML. Click on Operation->Programmable Keys.

  • Page 115: Empty Key (Softkeys Only)

    3. In the "Type" field, select Empty. 4. When configuring a softkey, in the state fields, check (enable) or uncheck (dis- able) the states you want to apply to this softkey. 5. Click to save your changes. Model 55i IP Phone User Guide 107...

  • Page 116: Phone Lock Key

    “Phone Lock”. Setting a Phone Lock Key Aastra Web UI Use the following procedure to configure a Phone Lock key on the 55i IP Phone. The procedure shows the softkey screen as an example. 1. Click on Operation->Softkeys and XML.
  • Page 117 2. Enter your user password and press ENTER. The phone unlocks. The LED for the key AND the Message Waiting Lamp go OFF. The “Lock” label appears next to the key you just pressed. Model 55i IP Phone User Guide 109...

  • Page 118: Deleting A Key

    Deleting a Key Aastra Web UI Use the following procedure to delete a key on the 55i IP Phone. The procedure shows the softkey screen as an example. 1. Click on Operation->Softkeys and XML. Click on Operation->Programmable Keys. Click on Operation->Expansion Module <N>..

  • Page 119: Making Calls

    You can also make a call by pre-dialling a number. Pre-dialling lets you view a number before you dial. Use the Backspace softkey to correct any errors. Tue Jan 01 10:10am L1 Dial > 201 ue Jan 01 10:10am > 1203 Dial Backspace Pause Quit Model 55i IP Phone User Guide 111...

  • Page 120: Using Handsfree Speakerphone

    • If you are in Speaker/headset audio mode, press handsfree and headset. • When the handset is on hook, press When handsfree is on, the speaker light turns on. 112 Model 55i IP Phone User Guide "Audio and enter a number at the dial tone. or the line/call...

  • Page 121: Using A Headset

    9. If you do not wish to save changes, press Cancel to return to the previous screen. Note: By default, the volume for the headset microphone is set to medium. "Headset Mic Volume" Model 55i IP Phone User Guide 113 page 34...
  • Page 122 4. Press the key to end the call. 114 Model 55i IP Phone User Guide...

  • Page 123: Using Intercom

    5. When you are finished speaking, hang up the phone by placing the handset back on-hook or by pressing active call. When you hang up, the remote phone also hangs up. or the Cancel key. or the line/call appearance button for the Model 55i IP Phone User Guide 115 Intercom...
  • Page 124 You can set specific incoming Intercom call features on the 55i IP phone using the Aastra Web UI. The following table describes these features. Incoming Intercom Features in Aastra Web UI Microphone Mute Auto Answer Play Warning Tone Allow Barge In...

  • Page 125: Redial

    , the telephone automatically dials the last to display the most recently dialed to scroll through the list to view the other numbers. , or lift the Handset or press any line key to cancel. Model 55i IP Phone User Guide 117 to see the oldest...

  • Page 126: Mute

    Note: If you place a muted call on hold, the phone automatically takes the call off mute when you reconnect to the call. 118 Model 55i IP Phone User Guide key to mute the handset, headset, or speakerphone. key to mute the handset, headset, or speakerphone.

  • Page 127: Receiving Calls

    Note: The John Smith Tue May 17 10:19am L1 Ring Keri March or the line/call appearance button for page button can be used to cancel the call pickup procedure. Model 55i IP Phone User Guide 119 "Customizing Your...

  • Page 128: Sending An Incoming Call To Voicemail

    If you're already on the phone your incoming call should go directly to voicemail. Your phone screen displays a voicemail icon ( ) along with the number of waiting messages, if you have unheard messages (example: x4). 120 Model 55i IP Phone User Guide...

  • Page 129: Handling Calls

    Note: If you are connected to another call, the phone does not beep to remind you that you still have a call on hold. key. John Smith Tue May 17 10:19am L1 Hold Keri March Model 55i IP Phone User Guide 121 key. When you...

  • Page 130: When On Hold

    To reconnect to a call press the line/call appearance button where that call is being held. If you press the call/line appearance button again, you disconnect from the call. 122 Model 55i IP Phone User Guide John Smith Tue May 17 10:19am L1 Connected >201...

  • Page 131: Transferring Calls

    Screen that displays when handset is lifted Use the following procedure to transfer a call to another extension. Use the following illustration as a reference. John Smith > Dial Conf Xfer More Transfer Key when handset is lifted Model 55i IP Phone User Guide 123...

  • Page 132: Conferencing Calls

    Party 2, before pressing the Transfer Key again to transfer Party 1 to Party 2. To cancel the transfer, select Cancel on the display screen or press Conferencing Calls The 55i IP phone offers two methods of conferencing: • Local conferencing (default method). • Centralized conferencing (for Sylantro and Broadsoft Servers) (Administrator must enable this method).

  • Page 133: Local Conferencing

    2. Call Party 2 by dialing their number (or answer an incoming call of a Party). 3. Wait for Party 2 to answer. When Party 2 answers, you can consult with them before adding them to the conference. John Smith >5566 Dial Conf Xfer Model 55i IP Phone User Guide 125...
  • Page 134 5. Press the Conf key. The two active calls link into a conference call on Line 1. Note: You can use names (if available) of the parties in the conference call. When a name is displayed, pressing 4 drops the displayed party from the call. 126 Model 55i IP Phone User Guide John Smith >7788 Dial...
  • Page 135 Use the following procedure to create a conference call using centralized conferencing. Use the following illustration as a reference. Conference key when handset is lifted "Centralized Conferencing" Joining two active calls in a con- "Joining Two Model 55i IP Phone User Guide 127...
  • Page 136 4 drops the displayed party from the call. If any party in the conference hangs up (including the party that began the conference), all other parties in the conference are still connected. 128 Model 55i IP Phone User Guide John Smith >7788...
  • Page 137 Line 1. Pressing Line 2 joins Party 1 and Party 2 to the conference on Line 2.) 6. Press the Conf Key again to join the Parties to the active conference. "Setting Up a Servers)". Model 55i IP Phone User Guide 129...

  • Page 138: Ending Calls

    (for example, if your caller is on hold). Press or the line/call appearance button of the active call to end the call. If connected through the handset, you can also place the handset back on hook to end the call. 130 Model 55i IP Phone User Guide...

  • Page 139: Managing Calls

    Key 2 which is the Directory key. Accessing Your Directory IP Phone UI Use the following procedure to access your Directory List. Use the following illustration as a reference.. Directory Key Model 55i IP Phone User Guide 131...
  • Page 140 • Delete an entry • Save entries to the Directory List - Save from the Display - Save from the Caller List - Save from the Redial List 132 Model 55i IP Phone User Guide Directory 97 items to view Press 1st letter...
  • Page 141 The following examples illustrate the IP Phone UI screens you can use to add/edit entries in the Directory List. Save Backspace Save Backspace Name Number more Line: 1 Cancel Screen 1 Label more Office | Label Cancel Screen 2 Model 55i IP Phone User Guide 133 characters characters characters characters entries...
  • Page 142 • You can use the Add Number softkey to add additional numbers to the cur- rent Directory entry (up to 7 numbers per name). 134 Model 55i IP Phone User Guide keys to toggle between Screen 1 and Screen 2.
  • Page 143 Change Add Number Home 783-555-7676 Line: 1 | Delete Dial Arrange Change Add Number Cell 783-444-5555 Line: 1 | Delete Dial Arrange Change Add Number Model 55i IP Phone User Guide 135 keys display for you to Quit Quit Quit...
  • Page 144 The following example illustrates the new arrangement of Steve Smith’s number.. Note: The Office label moves to the second position and the Home label moves to the last position. 136 Model 55i IP Phone User Guide Label: Cell 1. Office 2.
  • Page 145 • You can press Yes to delete the directory entry (name, number, label, and line) from the Directory List. • You can press Cancel to cancel the delete function. Delete? Steve Smith Cancel Model 55i IP Phone User Guide 137...
  • Page 146 Directory List. • You can press Number to delete only a specific number associated with a name. • You can press Cancel to cancel the delete function. 138 Model 55i IP Phone User Guide Delete number 2272939 or delete all...
  • Page 147 4. Enter the location on your computer where you want to download the Directory List and click SAVE. The directorylist.csv file downloads to your computer. 5. Use a spreadsheet application to open and view the Directory List. Model 55i IP Phone User Guide 139...
  • Page 148 3. To dial a displayed entry from the Directory List, pick up the handset, press the handsfree key, or press the Dial softkey. 4. To exit the Directory List, press the Quit softkey. 140 Model 55i IP Phone User Guide...

  • Page 149: Callers List

    Indicates a Call Waiting call in the Callers list. Indicates an incoming Call Waiting call. "2x" indicates this caller has called twice. The display shows the date and time of the last call from that caller. Model 55i IP Phone User Guide 141...

  • Page 150: Accessing The Callers List

    6. To dial a displayed entry from the Callers List, pick up the handset, press the handsfree button, or press a line key. 7. To exit the Callers List, press the Callers List key. 142 Model 55i IP Phone User Guide icon displays with the handset ON or OFF or the...
  • Page 151 5. To dial the displayed number press line keys. Jun 8 2:55pm John Burn r ns 9054550055 , or just lift the handset, or press any Model 55i IP Phone User Guide 143 to view the most . To erase one digit to the left...
  • Page 152 Use the following procedure to delete all items from the Callers List. 1. Press the Callers List Key. 2. Press the Delete softkey. 3. Press the Delete softkey again at the prompt to erase all items. 144 Model 55i IP Phone User Guide...
  • Page 153 4. Enter the location on your computer where you want to download the Callers List and click SAVE. The callerslist.csv file downloads to your computer. 5. Use a spreadsheet application to open and view the Callers List. Model 55i IP Phone User Guide 145...

  • Page 154: Call Forwarding

    Aastra Web UI. However, you must use the Aastra Web UI to set the per- line call forward settings. The per-line settings override the settings for global call forwarding. 146 Model 55i IP Phone User Guide Description Disables call forward...

  • Page 155: Setting Call Forwarding

    6. Press Done to save the settings. The following example shows the idle screen on the IP Phone with Call Forwarding set to "No Answer" mode. John Smith CFWD NoAnswer Sat Jan 1 01:04 Model 55i IP Phone User Guide 147...
  • Page 156 4. In the "Number of Rings" field, select the number of rings on the line before the call is forwarded. Valid values are 1 to 9. 148 Model 55i IP Phone User Guide...
  • Page 157 The following example shows the idle screen on the IP Phone with Call Forwarding set to "No Answer" mode. John Smith CFWD NoAnswer Sat Jan 1 01:04 Model 55i IP Phone User Guide 149...

  • Page 158: Missed Calls Indicator

    3. To clear a line item from the Callers List, select the line item you want to delete and press the Clear softkey. The line item is deleted from the Callers List. 150 Model 55i IP Phone User Guide...

  • Page 159: Voicemail

    Voicemail The Voicemail feature on the 55i IP phone allows you to use a line, configured with a phone number for dialing out, to connect to a voicemail server. For each assigned Voicemail number, there can be a minimum of 0 or a maximum of 1 Voicemail access phone number.

  • Page 160: Additional Features

    Aastra Web UI. Configuring Suppression of DTMF Playback Aastra Web UI Use the following procedure to configure suppression of DTMF playback. Note: "Suppress DTMF Playback" is disabled by default. 152 Model 55i IP Phone User Guide...
  • Page 161 2. Go to the "General" section 3. Enable the "Suppress DTMF Playback" field by checking the check box. (Dis- able this field by unchecking the box). Default is disabled. 4. Click to save your settings. Model 55i IP Phone User Guide 153...

  • Page 162: Display Dtmf Digits

    1. Click on Basic Settings->Preferences->General. 2. Enable the "Display DTMF Digits" field by checking the check box. Disable this field by unchecking the box). Default is disabled. 3. Click to save your settings. 154 Model 55i IP Phone User Guide...

  • Page 163: Enable/Disable Call Waiting

    You can disable call waiting using the configuration files or the Aastra Web UI. 146.) It then forwards the call according to the rule page 161). Model 55i IP Phone User Guide 155 "Incoming Call...
  • Page 164 Note: "Call Waiting" is enabled by default. 1. Click on Basic Settings->Preferences->General. 2. Call Waiting is enabled by default. If required, disable the "Call Waiting" field by unchecking the check box. 3. Click to save your settings. 156 Model 55i IP Phone User Guide...

  • Page 165: Play Call Waiting Tone

    1. Click on Basic Settings->Preferences->General. 2. A call waiting tone is enabled by default. If required, disable the "Play Call Wait- ing Tone" field by unchecking the check box. 3. Click to save your settings. Model 55i IP Phone User Guide 157...

  • Page 166: Stuttered Dial Tone

    Note: "Stuttered Dial Tone" is enabled by default. 1. Click on Basic Settings->Preferences->General. 2. Stuttered dial tone is enabled by default. If required, disable the "Stuttered Dial Tone" field by unchecking the check box. 3. Click to save your settings. 158 Model 55i IP Phone User Guide...

  • Page 167: Xml Beep Support

    Note: "XML Beep Support" is enabled by default. 1. Click on Basic Settings->Preferences->General. 2. "XML Beep Support" is enabled by default. If required, disable the "XML Beep Support" field by unchecking the check box. 3. Click to save your settings. Model 55i IP Phone User Guide 159...

  • Page 168: Status Scroll Delay

    1. Click on Basic Settings->Preferences->General. 2. Enter a value in the "Status Scroll Delay (seconds)" field. Valid values are: 1 to 25 seconds. Default is 5 seconds. 3. Click to save your settings. 160 Model 55i IP Phone User Guide...

  • Page 169: Incoming Call Interrupts Dialing

    Note: If you disable this field, and the phone receives an incoming call while you are dialing an outgoing call, you can pick up the call and perform transfer or conference as required. Model 55i IP Phone User Guide 161...
  • Page 170 1. Click on Basic Settings->Preferences->General. 2. Enable the "Incoming Call Interrupts Dialing" field by checking the check box. Disable this field by unchecking the box). Default is disabled. 3. Click to save your settings. 162 Model 55i IP Phone User Guide...

  • Page 171: Goodbye Key Cancels Incoming Calls

    1. Click on Basic Settings->Preferences->General. 2. The "Goodbye Key Cancels Incoming Call" field is enabled by default. If required, disable this field by unchecking the check box. 3. Click to save your settings. Model 55i IP Phone User Guide 163...
  • Page 172 "Goodbye Key Cancels Incoming Call" is disabled AND a second call comes in while you are on an active call, 164 Model 55i IP Phone User Guide THEN press the Goodbye key to reject the second incoming call.

  • Page 173: Upnp Mapping Lines (For Remote Phones)

    UPnP mapping lines. Contact your System Administrator for more information. Configuring UPnP Mapping Lines Aastra Web UI Use the following procedure to configure the UPnP mapping lines on the IP phone. 1. Click on Basic Settings->Preferences->General. Model 55i IP Phone User Guide 165...
  • Page 174 10. The line you select is the line that your remote phone uses to perform Univer- sal Plug and Play on the network you are connecting to. 3. Click to save your settings. 166 Model 55i IP Phone User Guide...

  • Page 175: Message Waiting Indicator

    2. The "Message Waiting Indicator Line" field is set to ALL lines by default. If required, change the setting to a specific line by selecting a line from the list. Valid values are All and lines 1 through 9. 3. Click to save your settings. Model 55i IP Phone User Guide 167...

  • Page 176: Incoming Intercom Call Features

    If you want to mute the intercom call, you enable this feature. If you want to unmute (or hear the intercom call), you disable this feature. "Microphone Mute" is enabled by default. 168 Model 55i IP Phone User Guide Description Allows you to enable or disable the microphone on the IP phone for Intercom calls made by the originating caller.
  • Page 177 IP phone for answering Intercom calls. To disable this field, uncheck the box. Note: If the Auto-Answer field is not checked (disabled), the phone rejects the incoming intercom call and sends a busy signal to the caller. Model 55i IP Phone User Guide 169...

  • Page 178: Using Redial Key For "Last Number Redial

    • Press the REDIAL button once, scroll the list of numbers, then press the REDIAL button again to dial the number that displays on the screen. The “last number redial” feature for the Redial key is static and is not configurable. 170 Model 55i IP Phone User Guide...

  • Page 179: Available Features Enabled By Administrators

    B receives notification from the server that the call was forwarded and the missed calls indicator is incremented on phone B. See the illustration below. Note: Your System Administrator can configure the Missed Call Summary Subscription feature on a global or per-line basis. Model 55i IP Phone User Guide 171...

  • Page 180: Customizable Callers List Key And Services Key

    Customizable Callers List Key and Services Key The 55i IP Phone currently has a Callers List key and a Services key. Your System Administrator can specify an XML URI that creates a custom Callers List and Services application for your phone. When you press the Callers List key or the Services key, the phone accesses a custom XML URI Callers List, or a custom XML URI Service.

  • Page 181: Answer And Ignore Softkeys For Xml Applications

    This enhancement is intended for IP phones operating with servers that support RFC3264 (for example, Broadsoft). If a server does not support RFC3264, then the IP phones do not use RFC3264 functionality. Model 55i IP Phone User Guide 173...

  • Page 182: Model 536M And 560M Expansion Modules

    Model 536M and 560M Expansion Modules The 55i IP Phone offers optional 536M and 560M Expansion Modules that attach to the right side of the phone to provide additional softkeys. Model 536M The 536M provides 18 softkeys in each column (totaling 36 keys) on the keypad.

  • Page 183: Using The Expansion Modules

    After configuring the softkeys on the 536M Expansion Module, you can record the name of the softkey on the paper labels provided with the Expansion Module. Press the softkey you want to use when applicable. Softkeys Lock Phone BLF Key Office (speeddial) Model 55i IP Phone User Guide 175...

  • Page 184: Function Keys

    Page 1"List 1" and "List 2" Page 2"List 3" and "List 4" Page 3"List 5" and "List 6". Softkeys Function Keys 176 Model 55i IP Phone User Guide List 1 List 2 Lock/Unlock BLF 200 Home (speeddial) (Press for page 1)
  • Page 185 For more information about configuring softkeys, see Keys page 53. For more information about installing 536M and 560M modules on your phone, see the Aastra 55i IP Phone Installation Guide. List 5 List 6 Page 3 Screen Softkeys and Programmable...

  • Page 186: Troubleshooting Solutions

    Why is my handset not working? Check to ensure that the handset cord is fully connected to both the phone and handset. See the section “Connecting a Handset or Headset” in the Aastra 55i Installation Guide for information. 178 Model 55i IP Phone User Guide...
  • Page 187 3. Enter the current user password and press 4. Enter the new user password and press 5. Re-enter the new user password and press A message, "Password Changed" displays on the screen. page 99 more information about the page Model 55i IP Phone User Guide 179...
  • Page 188 Why does my phone display "Bad Encrypted Config"? The IP phone displays "Bad Encrypted Config" because encrypted configuration files are enabled but the decryption process has failed. Report this error to your System Administrator. 180 Model 55i IP Phone User Guide "User Password" page...
  • Page 189 Note: Your phone is out of service temporarily during the restart and down- loading process. Aastra Web UI 1. Click on Operation->Reset. 2. Click 3. Click OK at the confirmation prompt. key to cancel. Model 55i IP Phone User Guide 181...
  • Page 190 1. Press on the phone to enter the Options List. 2. Enter your user password and press The phone unlocks. Aastra Web UI 1. Click on Operation->Phone Lock. 182 Model 55i IP Phone User Guide "Phone Lock Key" page 108.
  • Page 191 The phone locks dynamically and displays the following message: "Phone is locked". Unlock the Phone 3. Click on Operation->Phone Lock. 4. In the "Unlock the Phone?" field, click The phone unlocks dynamically and displays the following message: "Phone is unlocked". Model 55i IP Phone User Guide 183...

  • Page 193: Limited Warranty

    Aastra Telecom warrants this product against defects and malfunctions during a one (1) year period from the date of original purchase. If there is a defect or malfunction, Aastra Telecom shall, at its option, and as the exclusive remedy, either repair or replace the telephone set at no charge, if returned within the warranty period.

  • Page 195: Appendix A - Time Zone Codes

    AU-Adelaide AU-Darwin AU-Perth AW-Aruba BA-Sarajevo BB-Barbados BE-Brussels BG-Sofia BM-Bermuda BO-La Paz BR-Noronha BR-Belem BR-Fortaleza BR-Recife BR-Araguaina BR-Maceio BR-Sao Paulo BR-Cuiaba BR-Porto Velho BR-Boa Vista BR-Manaus BR-Eirunepe BR-Rio Branco BS-Nassau BY-Minsk BZ-Belize Time Zone Code Model 55i IP Phone User Guide...
  • Page 196 DO-Santo Domingo EE-Tallinn ES-Madrid ES-Canary FI-Helsinki FJ-Fiji FK-Stanley FO-Faeroe FR-Paris GB-London GB-Belfast GD-Grenada GF-Cayenne GI-Gibraltar GP-Guadeloupe GR-Athens GS-South Georgia GT-Guatemala GU-Guam GY-Guyana HK-Hong Kong HN-Tegucigalpa HR-Zagreb HT-Port-au-Prince HU-Budapest IE-Dublin IS-Reykjavik IT-Rome A-2 Model 55i IP Phone User Guide Time Zone Code...
  • Page 197 MC-Monaco MD-Chisinau MK-Skopje MQ-Martinique MS-Montserrat MT-Malta MX-Mexico City MX-Cancun MX-Merida MX-Monterrey MX-Mazatlan MX-Chihuahua MX-Hermosillo MX-Tijuana NI-Managua NL-Amsterdam NO-Oslo NR-Nauru NU-Niue NZ-Auckland NZ-Chatham PA-Panama PE-Lima PL-Warsaw PR-Puerto Rico PT-Lisbon PT-Madeira PT-Azores PY-Asuncion Model 55i IP Phone User Guide Time Zone Code...
  • Page 198 RU-Vladivostok RU-Sakhalin RU-Magadan RU-Kamchatka RU-Anadyr SE-Stockholm SG-Singapore SI-Ljubljana SK-Bratislava SM-San Marino SR-Paramaribo SV-El Salvador TR-Istanbul TT-Port of Spain TW-Taipei UA-Kiev US-Eastern US-Central US-Mountain US-Pacific US-Alaska US-Aleutian US-Hawaii UY-Montevideo VA-Vatican YU-Belgrade A-4 Model 55i IP Phone User Guide Time Zone Code...
  • Page 199 50 empty key 55 empty key, softkey for 106, 107 expansion module, 536M and 560M 174 expansion module, 560M 174 flash key 54 flash key, setting key for 87 Model 55i IP Phone User Guide Index-1...
  • Page 200 60 as park and pickup 90, 92 as services 98 as sprecode key 88 as XML services 82 Index-2 Model 55i IP Phone User Guide Index deleting 110 flash key 87 lock and unlock 108 language overview 42...
  • Page 201 120, 151 warning tone, for Intercom 169 warranty, limited 185 Web UI, using 19 XML application title 82 XML application URI 82 XML beep support 159 XML key 54 XML services 82 accessing 85 Model 55i IP Phone User Guide Index-3...
  • Page 204 If you’ve read this owner’s manual and consulted the Troubleshooting section and still have problems, please visit our website at www.aastra.com or call 1-800-574-1611 for technical assistance. © Aastra Telecom Inc. 2007 41-001200-00 Rev 01...

This manual is also suitable for:

55i

Table of Contents