Table of Contents
Advertisement
2. For softkeys, select from "Key 1" through "Key 20".
or
For programmable keys, select from "Key 1" through "Key 6".
3. In the "Type" field, select Sprecode.
4. In the "Label" field, enter a label to display on the IP phone for this soft-
key.
5. In the "Value" field, enter the appropriate value for accessing specific
services from the server.
Note: For values to enter in this field, contact your system administrator.
6. If configuring a softkey on the Bottom Keys, in the state fields, check
(enable) or uncheck (disable) the "Connected" state to apply to this soft-
key.
7. Click
8. Click on Operation->Reset.
9. In the "Restart Phone" field click
to save your changes.
to restart the IP phone.
Model 55i IP Phone User Guide
53
Advertisement
Table of Contents
