Aastra 55I IP PHONE - RELEASE 2.0 User Manual page 62

3. Enter a server value in the "Pickup Parked Call" field.
Note: For values to enter in this field, see the table
uration Values"
4. Click
5. Click on Operation->Reset.
6. In the "Restart Phone" field click
Park/Pickup Softkey Configuration
The programmable method of configuration creates park and pickup
softkeys that you can configure on the 55i phone.
You can set a softkey as "Park" or "Pickup" and then:
• specify a customized label to display on the Phone UI
• specify a value
• specify which line to use
• specify the state of the park and/or pickup keys
On the IP phone UI, the Park/Pickup feature displays the following:
• When a call comes in, and you pickup the handset, the custom label that
you configured for the Park softkey displays on the Phone UI.
• After the call is parked, the label that you configured for the Pickup soft-
key displays on other phones in the network. You can then press the
"Pickup" softkey, followed by the applicable value to pickup the call on
another phone in your network.
You can configure a Park and Pickup programmable configuration using
the Aastra Web UI.
Softkey Configuration Using the Aastra Web UI
On the 55i, you configure a Park and/or Pickup key at Operation->Softkeys
and XML. You enter a key label, and value for a specific line on the phone.
The default state of the Park configuration is "connected". The default state
of the Pickup configuration is "idle, outgoing".
Note: Applicable values depend on the server in your network (Asterisk, Broad-
Works, Sylantro, ININ PBX. See the table
ration Values"
56 Model 55i IP Phone User Guide
on page 54.
to save your changes.
on page 54.
"Park/Pickup Call Server Config-
to restart the IP phone.
"Park/Pickup Call Server Configu-