Table of Contents
Advertisement
Making Calls
This section describes ways to make calls on your 9143i phone, using your handset, speakerphone or headset.
Dialing a Number
First, take the phone off-hook by:
•
lifting the handset
•
pressing
or
•
pressing a line/call appearance key.
At the dial tone, enter the number you wish to call.
Note:
After dialing the number, the phone has a short delay before sending the call. To send the call immediately, you can
press the "Dial" softkey (if the handset is offhook) or the "#" key immediately after dialing the number. The phone sends
the call without delay.
If you are unable to make calls within certain area codes, check with your System Administrator for any toll restrictions
placed on your extension that may restrict your access to long distance area codes or dialing prefixes.
When your party picks up, a timer appears on your display that records the length of your call.
If the Live DialPad option is on, as soon as you press the first digit on the dial pad the phone automatically selects the
next available line, go off-hook and dial as digits are pressed.
Using Handsfree Speakerphone
The handsfree feature allows you to speak to someone without using the handset or headset. Your phone must be in
either the Speaker or Speaker/Headset audio mode. For more information about setting the audio mode on your phone,
see
"Set Audio"
on
page
IP Phone UI
•
To dial using handsfree, first press
•
To answer a call on your phone using handsfree, press
•
If you are in Speaker audio mode, lift the handset and press
•
If you are in Speaker/headset audio mode, press
•
When the handset is on hook, press
When handsfree is on, the speaker light turns on.
82
23.
and enter a number at the dial tone.
to disconnect the call.
=Dial
or the line/call appearance key.
to switch between handsfree and handset.
to switch between handsfree and headset.
41-001383-05 REV03 – 07.2014
Advertisement
Table of Contents
