Aastra 55I IP PHONE - RELEASE 2.0 User Manual page 64

4. In the "Label" field, enter a label for the Park softkey.
5. In the "Value" field, enter the appropriate value based on the server in
your network.
Note: For values to enter in this field, see the table
uration Values"
6. In the "Line" field, select a line for which to apply the Park configura-
tion.
7. If configuring a softkey on the Bottom Keys, in the state fields, check
(enable) or uncheck (disable) the "Connected" state to apply to this soft-
key.
8. Pick another softkey (from top or bottom keys) to configure for Picking
up a call.
9. In the "Label" field, enter a label for the Pickup softkey.
10.In the "Value" field, enter the appropriate value based on the server in
your network.
Note: For values to enter in this field, see the table
uration Values"
11.In the "Line" field, select a line for which to apply the Pickup configura-
tion.
12.If configuring a softkey on the Bottom Keys, in the state fields, check
(enable) or uncheck (disable) the "Idle" and "Outgoing" states to apply
to this softkey.
13.Click
14.Click on Operation->Reset.
15.In the "Restart Phone" field click
58 Model 55i IP Phone User Guide
on page 54.
on page 54.
to save your changes.
"Park/Pickup Call Server Config-
"Park/Pickup Call Server Config-
to restart the IP phone.