JunosE 11.2.x Multicast Routing Configuration Guide
30
Use to display information about all or specified multicast forwarding entries.
Specify a multicast group IP address or both a multicast group IP address and a
multicast source IP address to display information about particular multicast forwarding
entries.
Use the summary option to see a summary rather than a detailed description.
Use the count option to display the number of multicast forwarding entries.
Use the statistics option to display statistics for packets received through all multicast
forwarding entries that the router has added to the multicast routing table and
established on the appropriate line modules.
Use the active option to display the active multicast routes with admission bandwidth
greater than the specified bandwidth threshold. The default is 4000 bps.
Field descriptions
(S, G)—IP addresses of the multicast source and the multicast group
Admission bandwidth—Admission bandwidth per mroute, in bps
QoS bandwidth—QoS bandwidth per mroute, in bps
Uptime—Length of time that the (S,G) pair has been active, in days
hours:minutes:seconds format
Data Rate—Flow rate for the threshold entry, in Kbps
SPT Threshold—SPT threshold value for the entry, in Kbps
Threshold—Threshold value for the entry, in Kpbs
Expires—Length of time that the (S,G) pair can be active, in days
hours:minutes:seconds format or never
RPF route—IP address and subnetwork mask of the RPF route
incoming interface—Type and specifier of the incoming interface for the RPF route
neighbor address—IP address of the neighbor
State/Owner—Owner of the route
Local—Route belonging to the local interface
Static—Static route
Other protocols—Route established by a protocol such as RIP or OSPF
Incoming interface list—List of incoming interfaces on the router. Details include:
Type of interface and its specifier
Action that the interface takes with packets: Accept or Discard
Multicast protocol that owns the interface
Copyright © 2010, Juniper Networks, Inc.
Need help?
Do you have a question about the JUNOSE 11.2.X MULTICAST ROUTING and is the answer not in the manual?