Juniper JUNOSE 11.2.X MULTICAST ROUTING Configuration Manual page 140

JunosE 11.2.x Multicast Routing Configuration Guide
show ip pim sparse-mode unicast-route
show ip pim spt-threshold
118
<118.1.33.35, 232.0.0.1>
SSM Group
RPF Route: 118.1.0.0/255.255.0.0
Oifs:
Register Oif to RP: 141.0.0.2 suppressed for SSM Group.
Address: 134.0.0.1
Joined as <S, G>
<10.0.1.8, 235.1.1.1>
Group-to-RP mapping: 224.0.0.0/240.0.0.0
RPF Route: 10.0.0.0/255.0.0.0
Oifs:
Address: 78.7.7.7
Joined as <*, G>
Count of entries - <S, G>
See show ip pim sparse-mode sg-state.
Use to display the unicast routes that PIM sparse mode is using.
Field descriptions
Route—IP address and network mask for the unicast route
RpfNbr—RPF neighbor
Iif—Incoming interface for the unicast route
Pref—Preference value for the unicast route
Metric—Value of metric for the unicast route (type of metric varies with the unicast
protocol)
Count of entries—Number of unicast routes that PIM sparse mode is using
Example
host1:2#show ip pim sparse-mode unicast-route
PIM SM unicast route table information
Route
---------------------------------------------------------------------------
122.0.0.0 /255.0.0.0
Count of entries: 1
See show ip pim sparse-mode unicast-route
Use to display the threshold for switching to the shortest path tree at a PIM designated
router.
Field descriptions
Access List Name—Name of the IP access list that specifies the groups to which the
threshold applies
IIF: 118.1.0.1 (Directly attached)
Interface: ATM3/0.104
Join Expires: 161
EntryExpires: 143
IIF: 106.0.7.3
Interface: loopback7
: 3
<*, G> : 3
<*, *, RP>: 0
RpfNbr
Copyright © 2010, Juniper Networks, Inc.
RP: 123.0.0.1
UpNbr: 106.0.3.7
Iif Pref Metric
122.0.0.1 255 1