Activating Multicast Qos Adjustment Functions; Figure 3: Multicast Traffic Receipt Without Forwarding - Juniper JUNOSE 11.1.X MULTICAST ROUTING Configuration Manual
For e series broadband services routers - multicast routing configuration
Hide thumbs
Also See for JUNOSE 11.1.X MULTICAST ROUTING:
- Command reference manual (1506 pages) ,
- Configuration manual (794 pages) ,
- Reference manual (294 pages)
Table of Contents
Advertisement
NOTE: Ensure that PIM-SM (or any other upstream multicast protocol) is informed
of the group (or source-group) interest.
Figure 3: Multicast Traffic Receipt Without Forwarding
Activating Multicast QoS Adjustment Functions
The ip multicast-routing bandwidth-map command activates the specified
bandwidth map. By activating the bandwidth map, this command also activates the
multicast QoS adjustment function contained in the bandwidth map.
CAUTION: To activate multicast QoS adjustment, you must first create a bandwidth
map. See "Defining a Multicast Bandwidth Map" on page 10 for details.
ip multicast-routing bandwidth-map
Use to activate the QoS adjust function on the router.
Example
host1(config)#ip multicast-routing bandwidth-map mcast-bandwidths
Use the no version to disable the multicast QoS adjustment function on the
router.
See ip multicast-routing bandwidth-map.
Chapter 1: Configuring IPv4 Multicast
Activating Multicast QoS Adjustment Functions
17
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the JUNOSE 11.1.X MULTICAST ROUTING and is the answer not in the manual?
Questions and answers