Juniper JUNOSE 11.1.X MULTICAST ROUTING Configuration Manual page 261

show ipv6 pim sparse-mode unicast-route
host1:2#show ipv6 pim sparse-mode sg-state
PIM SM route table and oif information
<*, ff0e::1:3>
Group-to-RP mapping: ff00::/12 RP: ::123:1
RPF Route: ::123:1/96 IIF: :106:73 UpNbr: ::106:37
Oifs:
Address: ::78:7:7 Interface: loopback7
Local group membership present.
<*, ff0e::a:1>
Group-to-RP mapping: ff001:/12 RP: ::123:1
RPF Route: :123:1/96 IIF: :106:73 UpNbr: :106:37
Oifs:
Address: ::78:7:7 Interface: loopback7
Local group membership present.
<::118:34, ff3e::1>
SSM Group
RPF Route: ::118:0/96 IIF: :118:1 (Directly attached)
Oifs:
Register Oif to RP: ::141:2 suppressed for SSM Group.
Address: ::134:1 Interface: ATM3/0.104
Joined as <S, G>
<::118:35, ff3e::1>
SSM Group
RPF Route: ::118:0/96 IIF: ::118:1 (Directly attached)
Oifs:
Register Oif to RP: ::141:2 suppressed for SSM Group.
Address: ::134:1 Interface: ATM3/0.104
Joined as <S, G>
<::10:8, ff0e::5:1>
Group-to-RP mapping: ff00::/12 RP: ::123:1
RPF Route: ::10:0/96 IIF: ::106:73 UpNbr: ::106:37
Oifs:
Address: ::78:7:7 Interface: loopback7
Joined as <*, G>
Count of entries - <S, G>
<*, G>
<*, *, RP>: 0
See show ipv6 pim sparse-mode sg-state
Use to display the unicast routes that PIM sparse mode is using.
Field descriptions
Route IPv6 address and network mask for the unicast route
RpfNbr RPF neighbor
Iif Incoming interface for the unicast route
Pref Preference for the unicast route
Metric Value of metric for the unicast route (type of metric varies with the
unicast protocol)
Count of entries Number of unicast routes that PIM sparse mode is using.
Example
Chapter 7: Configuring PIM for IPv6 Multicast
Join Expires: 161
Join Expires: 161
EntryExpires: 143
: 3
: 2
239
Monitoring PIM