Monitoring Pim - Juniper JUNOSE 11.1.X MULTICAST ROUTING Configuration Manual

JUNOSe 11.1.x Multicast Routing Configuration Guide
clear ip pim interface count
clear ip pim remote-neighbor count

Monitoring PIM

You can display information about PIM events and parameters.
110

Monitoring PIM

Use to clear the group-to-RP router mappings that the router learned through
auto-RP.
Specify the IP address of an RP to clear the group-to-RP mappings for a particular
RP. If you do not specify an IP address, the router clears the group-to-RP
mappings on all RP routers learned through auto-RP.
Example
host1#clear ip pim auto-rp 192.34.56.7
There is no no version.
See clear ip pim auto-rp.
Use to clear the counters for multicast packet statistics on all interfaces or a
specified interface.
Specify an interface type and specifier, such as atm 3/0, to clear the counters on
that interface. For details about interface types and specifiers, see Interface Types
and Specifiers in JUNOSe Command Reference Guide.
If you do not specify an interface, the router clears the counters on all interfaces.
Example
host1#clear ip pim interface atm 3/0.5 count
There is no no version.
See clear ip pim interface count.
Use to clear the counters for remote neighbor statistics on all interfaces or the
specified interface.
Specify the IP address of an interface to clear the counters for that interface.
If you do not specify an interface, the router clears the counters on all interfaces.
Example
host1#clear ipv6 pim remote-neighbor 1001::1 count
There is no no version.
See clear ip pim remote-neighbor count.