JUNOS Release 10.2 Software Installation and Upgrade Guide
Deleting a License
Before deleting a licenses, establish basic network connectivity with the router. For
instructions on establishing basic connectivity, see the Getting Started Guide for your
router.
To delete a license key from the router with the CLI:
1.
2.
3.
Saving License Keys
Before deleting a licenses, establish basic network connectivity with the router. For
instructions on establishing basic connectivity, see the Getting Started Guide for your
router.
To save the licenses installed on the router to a file using the CLI:
1.
2.
3.
Verifying JUNOS Licenses
To verify JUNOS license management, perform the following tasks:
Displaying Installed Licenses
Verify that the expected licenses are installed and active on the router.
Purpose
66
Deleting a License
Enter operational mode in the CLI.
Enter the following command for each license, specifying the license ID. You
can delete only one license at a time.
user@host> request system license delete license-id
Go on to "Verifying JUNOS Licenses" on page 66.
Enter operational mode in the CLI.
To save the installed license keys to a file or URL, enter the following command:
user@host> request system license save filename | url
For example, the following command saves the installed license keys to a file
named
:
license.config
user@host> request system license save ftp://user@host/license.config
Go on to "Verifying JUNOS Licenses" on page 66.
Displaying Installed Licenses on page 66
Displaying License Usage on page 67
Displaying Installed License Keys on page 68