Table of Contents
Advertisement
Copy Saved Files to the Router
To copy the saved configuration to the router:
1.
2.
3.
Load and Commit the Configuration File
Once the saved configuration file is copied to the router, you load and commit the
file:
1.
2.
3.
Log in to the console as
root
Escape character is '^]'.
[Enter]
router (ttyd0)
login: root
Password: [Enter]
Initially, access to the router is limited to the console port after a recovery
installation. Access through the management ports and interfaces is set in the
configuration. For information about accessing the router through the console
port, see the administration guide for your particular router.
Start the CLI:
# cli
Copy the configuration file on the remote server to the router s
root@host> ftp remote-server
user: username
password: password
ftp> bin
Type set to I.
ftp> get /path/file
ftp> bye
Goodbye.
Start the CLI configuration mode.
user@routername> configure
Entering configuration mode
[edit]
user@host#
Load the file into the current configuration. You should override the existing file.
user@host#
load override /var/tmp/filename
load complete
Commit the file.
Chapter 5: Completing a Recovery Installation
. There is no password.
Copy Saved Files to the Router
directory:
/var/tmp
57
Advertisement
Table of Contents
