Juniper JUNOS SOFTWARE 10.2 - SOFTWARE INSTALLATION AND UPGRADE GUIDE 4-28-2010 Upgrade Manual page 53

5.
Downloading Software Using the Command-Line Interface
You download the software package you need from the Juniper Networks Support
Web site at
NOTE: To access the download section, you must have a service contract and an
access account. If you need help obtaining an account, complete the registration
form at the Juniper Networks Web site:
To download the software:
1.
2.
3.
4.
5.
A dialog box opens.
Save the file to your system. If you are placing the file on a remote system, you
must make sure that the file can be accessible by the router using HTTP, FTP,
or scp.
http://www.juniper.net/support/
On the command line, initiate an FTP session with the server
ftp ftp.juniper.net
Log in with your customer support–supplied username and password:
User <black.juniper.net:<none>>: username
331 Password required for username.
Password: password
Once validated, the FTP session opens.
Navigate to the correct software directory.
The FTP server software download directory structure is as follows:
/volume/download/docroot/software/<version>/<release>
Available directories include:
—The software version.
version
junos
junos-export
junos-fips
—The software release. For more information on release numbers,
release
see "JUNOS Software Release Numbers" on page 8.
Set the file transfer mode to binary:
bin
Type set to 1.
Specify the directory in which you wish to place the file.
Downloading Software Using the Command-Line Interface
Chapter 4: Completing a Standard or Change Category Installation
.
https://www.juniper.net/registration/Register.jsp
.
:
ftp.juniper.net
31