Juniper JUNOS SOFTWARE 10.2 - SOFTWARE INSTALLATION AND UPGRADE GUIDE 4-28-2010 Upgrade Manual page 18

JUNOS Release 10.2 Software Installation and Upgrade Guide
NOTE: For additional information about JUNOS Software—either corrections to or
information that might have been omitted from this guide—see the software release
notes at
Audience
This guide is designed for network administrators who are configuring and monitoring
a Juniper Networks M Series, MX Series, T Series, EX Series, or J Series router or
switch.
To use this guide, you need a broad understanding of networks in general, the Internet
in particular, networking principles, and network configuration. You must also be
familiar with one or more of the following Internet routing protocols:
Personnel operating the equipment must be trained and competent; must not conduct
themselves in a careless, willfully negligent, or hostile manner; and must abide by
the instructions provided by the documentation.
Supported Routing Platforms
For the features described in this manual, the JUNOS Software currently supports
the following routers:
xviii
Audience
http://www.juniper.net/
Border Gateway Protocol (BGP)
Distance Vector Multicast Routing Protocol (DVMRP)
Intermediate System-to-Intermediate System (IS-IS)
Internet Control Message Protocol (ICMP) router discovery
Internet Group Management Protocol (IGMP)
Multiprotocol Label Switching (MPLS)
Open Shortest Path First (OSPF)
Protocol-Independent Multicast (PIM)
Resource Reservation Protocol (RSVP)
Routing Information Protocol (RIP)
Simple Network Management Protocol (SNMP)
J Series
M Series
MX Series
T Series
EX Series
.